Repozitorij Univerze v Novi Gorici

Iskanje po repozitoriju
A+ | A- | Pomoč | SLO | ENG

Iskalni niz: išči po
išči po
išči po
išči po
* po starem in bolonjskem študiju


11 - 20 / 70
Na začetekNa prejšnjo stran1234567Na naslednjo stranNa konec
Narrative discourse in anomic aphasia
Sara Andreetta, Anna Cantagallo, Andrea Marini, 2012, izvirni znanstveni članek

Najdeno v: ključnih besedah
Povzetek najdenega: ...analiza diskurza, aphasia, neurolinguistics, speech disorders, discourse analysis, ...
Ključne besede: afazija, govorne motnje, nevropsihologija, analiza diskurza, aphasia, neurolinguistics, speech disorders, discourse analysis
Objavljeno: 09.05.2017; Ogledov: 2339; Prenosov: 8
URL Polno besedilo (0,00 KB)

Expectations in Responsive Space
Peter Purg, 2013, raziskovalni ali dokumentarni film, zvočna ali video publikacija

Opis: These responses by the students and mentors were gathered at the "FOReCAST" (Responsive Art in Public Space) workshop at the Graz University of Technology, Institute of Contemporary Art, Graz (Austria) 2014, conducted within the project. The guiding questions were: - "What do you expect from this workshop?" asked on the first day of the face2face stage (May 6) after a 3-week online collaboration phase; and - "What was the most important thing that happened to you at this workshop?" asked at the last day (May 16). Interviewed, shot and edited by pETER Purg, May 2014. Shot in HD with ActionPro SD20F minicam. This video is part of a large-scale collective methodology reflection of the teachers involved in several "mobilities" (workshops across the region) of the ADRIART project, "Advancing Digitally Renewed Interactions in Art Teaching". More about the workshop: . Visit and join to stay tuned. "With the support of the Lifelong Learning, Erasmus, Programme of the European Union. These videos reflect the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein."
Najdeno v: ključnih besedah
Povzetek najdenega: ...ADRIART, student expectations, needs analysis, research, video, experiment...
Ključne besede: ADRIART, student expectations, needs analysis, research, video, experiment
Objavljeno: 06.07.2016; Ogledov: 2508; Prenosov: 0

Patrik Baksa, 2016, magistrsko delo

Opis: The majority of the world’s goods are transported over water and dredging is essential for the development of harbors and ports. Therefore, the management of dredged material is a worldwide issue. Due to its chemical and petrographic, mineralogical and homogeneity composition, marine sediments are an appropriate raw material to use in the brick industry. Marine sediments can serve as raw material for the production of clay blocks, roofing and ceramic tiles. Different analyses were carried out in order to determine if the dredged material from the Port of Koper is environmentally friendly and suitable to use in the brick industry. These analyses included: a chemical analysis, a mineralogical analysis, a particle size analysis and a chloride content (Cl-) analysis, and tests of firing in a gradient furnace. Furthermore, tests of mechanical properties, as well as tests of frost-resistance of the samples were carried out. On the basis of primary analyses and samples prepared in a lab, it was established that marine sediments from the Port of Koper without any additives are only conditionally suitable as a source material for producing brick products. In collaboration with Gorica brickworks (Goriške opekarne), a pilot production from a mixture of 60% component B from Gorica brickworks and 40% component A (marine sediments) from the Port of Koper was prepared. Different tests showed the mixture could be appropriate for brick production.
Najdeno v: ključnih besedah
Povzetek najdenega: ...brick industry. These analyses included: a chemical analysis, a mineralogical analysis, a particle size analysis...
Ključne besede: marine sediments, recycling, clay bricks, chemical analysis, mechanical properties, brick production.
Objavljeno: 05.09.2016; Ogledov: 3389; Prenosov: 220
.pdf Polno besedilo (3,30 MB)

Slavica Ilc, 2016, magistrsko delo

Opis: Slovenia is the third most forested country in Europe. Nevertheless, in the last twenty five years this natural wealth did not get the adequate role in national development strategies, which unnecessary reduced their sustainability potential and lead the Slovenian forest-wood industry in a very bad situation. The forest-based sector in Europe is in a period of profound structural changes, which requires reassessment of the wood-chain products outlook. In the master’s thesis, the importance of integration of forestry and wood industry has been evaluated with the meaningful connection of different analytical methods: material flow analysis (MFA), SWOT analysis and life cycle assessment (LCA). With comparison of the roundwood and sawnwood material flow in Slovenia, Italy and Austria, the critical points in the Slovenian forest-wood chain were identified. In contrast to Austria and Italy, where wood is intensively reworked, Slovenia exports large amounts of untreated roundwood. As a consequence, the gross value added (GVA) per employee of wood sector in Slovenia reaches only 40 % of GVA in Austria and 50 % of GVA in Italy. Not only MFA, but also the SWOT and LCA analyses show, that wood processing into finished products is important both in terms of the value added and the environmental impact, as well as for more decisive shift of the economy towards a low-carbon society. Slovenian economy could take advantage of its sustainable development potential to a great extent by increasing the level of raw material self-sufficiency and energy independency. It is essential to re-establish forest-wood processing chain, to rework wood at home into products with the highest added value, and to use wood residues as renewable feedstock in green chemistry industry and for transformation into energy with novel technologies. Slovenian vision of sustainable economy has great potential, but requires enhanced cross-sectoral integration of forestry, wood processing, construction, chemistry and energy.
Najdeno v: ključnih besedah
Povzetek najdenega: ...connection of different analytical methods: material flow analysis (MFA), SWOT analysis and life cycle assessment...
Ključne besede: sustainability, forest-wood processing chain, development potential, material flow analysis (MFA), SWOT analysis, life cycle assessment (LCA)
Objavljeno: 30.09.2016; Ogledov: 4582; Prenosov: 201
.pdf Polno besedilo (1,77 MB)

An extracellular polymeric substance quickly chelates mercury(II) with N-heterocyclic groups
Claudia Faleri, Dario Battistel, Salvatore Daniale, Michele Gallo, Franco Baldi, Alojz Kodre, Iztok Arčon, 2017, izvirni znanstveni članek

Opis: A strain of Klebsiella oxytoca DSM 29614 is grown on sodium citrate in the presence of 50 mg l−1 of Hg as Hg(NO3)2. During growth, the strain produces an extracellular polymeric substance (EPS), constituted by a mixture of proteins and a specific exopolysaccharide. The protein components, derived from the outer membrane of cells, are co-extracted with the extracellular exopolysaccharide using ethanol. The extracted EPS contains 7.5% of Hg (total amount). This indicates that EPS is an excellent material for the biosorption of Hg2+, through chemical complexation with the EPS components. The binding capacity of these species towards Hg2+ is studied by cyclic voltammetry, and Hg L3-edge XANES and EXAFS spectroscopy. The results found indicate that Hg2+ is mainly bound to the nitrogen of the imidazole ring or other N-heterocycle compounds. The hydroxyl moities of sugars and/or the carboxyl groups of two glucuronic acids in the polysaccharide can also play an important role in sequestring Hg2+ ions. However, N-heterocyclic groups of proteins bind Hg2+ faster than hydroxyl and carboxyl groups of the polysaccharide.
Najdeno v: ključnih besedah
Ključne besede: Klebsiella oxytoca, Biosorption, Proteins, Polysaccharide, Cyclic voltammetry, EXAFS analysis
Objavljeno: 03.03.2017; Ogledov: 2776; Prenosov: 0
.pdf Polno besedilo (1,66 MB)

Franja Prosenc, 2017, doktorska disertacija

Opis: Water security and quality are a global issue of concern, which have recently become alarming due to the growth of the human population, industrialisation and expanded agricultural activities. Biologically active compounds, such as pharmaceuticals and personal care products can have major adverse effects on aquatic organisms, and are therefore one of the biggest threats in water quality. Another major concern is the spread of waterborne pathogens, including multidrug resistant (MDR) bacteria, which can cause serious illnesses in humans. In order to maintain water abundance and quality, it is necessary that adequate wastewater treatment and analytical techniques allowing for sensitive and fast-response detection of water hazards are in place. Conventional (waste)water treatment technologies often fail to adequately remove all of the water hazards detailed above. Moreover, conventional analytical techniques currently used in water quality control are, although highly selective and sensitive, time-extensive, with throughput of merely 2 to 3 samples per hour, excluding the time for sample preparation. With respect to these drawbacks, research was proposed to explore new approaches for degradation of recalcitrant compounds, inactivation of microorganisms, and fast screening methods, which are listed in the second chapter of this dissertation as research objectives. In the third chapter, an extensive theoretical background on the hazards found in aquatic environment, namely pharmaceuticals and waterborne pathogens, is given. Pharmaceuticals enter the environment through several routes (disposal of unused medication via the toilet, pharmaceuticals passing through the human body unchanged/slightly transformed, animal excretions of pharmaceutically active compounds, insufficient wastewater treatment, etc.); therefore, traces of pharmaceuticals have repeatedly been reported in surface waters, groundwater, wastewater effluents, and even drinking water. Iodinated contrast agents (ICAs), as the compounds of interest in this project are further described. ICAs are eliminated from the human body practically unchanged; therefore a large proportion of them end up in municipal and hospital wastewater, where they can be present in concentrations of up to 2.4 g/L. Their ecotoxicity, degradation attempts, as well as detection monitoring in the environment are reviewed within the chapter. Additionally, waterborne pathogens, which account for 2.2 million deaths per year, are reviewed in this chapter, with emphasis on multidrug-resistant (MDR) bacteria. Although MDR infections are mostly prevalent in hospital environments, the presence of MDR bacteria in the environment is not a rarity. A high percentage of bacterial isolates in waters have been shown to be of an MDR phenotype. The theoretical background in analytical methods in water quality monitoring is also given in this chapter. Vanguard and rearguard techniques are explained, the first offering simple, cheap, and rapid sample screening, but sacrificing sensitivity and selectivity, whereas the second providing the highest quality information, excellent sensitivity and selectivity, but in expense of complicated and timely sample handling and high-cost instruments. By combining the two techniques the benefits of both can be exploited in a single system. The basic principles of thermal lens spectrometry (TLS) and its miniaturised version - the thermal lens microscopy (TLM) as fast screening methods providing high sensitivity are further explained, and their practical applications are reviewed. Furthermore, composite materials have recently been finding applications in water treatment technologies, as filter materials, adsorptives for pollutants, catalysts for degradation reactions, and disinfectants. The applications of three main types of composites: synthetic composites, biocomposites, and nanocomposites, are also reviewed within this chapter. The core of this dissertation is presented in the fourth and the fifth chapter, which examine two separate approaches for water treatment, as well as analytical methods for fast screening purposes. The fourth chapter is investigating options for degradation of iodinated X-ray agents (ICAs), namely diatrizoate, through biodegradation with extracellular enzymes of white rot fungus Dichomitus squalens, and chemical oxidation with manganese(III) acetate. Enzymatic degradation with laccase (Lac) and manganese peroxidase (MnP) at low enzymatic activities was unsuccessful, whereas at approximately 3-times higher activities the enzymes were capable of 60 % degradation in 12 days. Chemical oxidation of diatrizoate with manganese(III) acetate resulted in 85 % degradation in 12 days. Moreover, the suitability of microfluidic flow injection analysis coupled with thermal lens microscopy (μFIA-TLM) as a fast screening method for diatrizoate degradation was examined. The degradation was monitored through the release of iodide from the diatrizoate molecule. μFIA-TLM proved to be a preferable method over UV-Vis spectrophotometry, due to its higher sensitivity, sample throughput, and simple sample handling. Limit of detection (LOD) for μFIA-TLM method was estimated to be 0.14 µM in a 100 µm channel, which is 9 times lower than LOD obtained in UV-Vis measurements. In addition to μFIA-TLM and UV-VIS, high-pressure liquid chromatography (HPLC) was used to monitor the remaining parent compound in the reaction mix. In the fifth chapter, the second water treatment approach is described. This includes synthesis of biocomposite materials from cellulose (CEL) and keratin (KER), with metal (Ag0, AgCl, Au0) nanoparticles (NPs). Materials were characterised for presence, species, and size of NPs with X-ray diffraction (XRD) and with scanning electron microscopy (SEM). Nanoparticles were confirmed to be of expected species, with sizes as follows: 6.3 ± 0.5 nm for Au NPs, 12 ± 2 nm for Ag NPs, and 22 ± 1 nm for AgCl NPs. In order to evaluate antibacterial properties of the materials, contact tests with gram-negative (Escherichia coli and Pseudomonas aeruginosa) and gram-positive bacteria (Staphylococcus aureus, Methicillin-resistant S. aureus (MRSA), and Vancomycin-resistant Enterococcus faecalis (VRE)) were conducted. Direct-contact assay over 24 hours showed a dose and species-dependent antibacterial activity of [CEL:KER + Ag NPs] materials. The highest potency against the selected bacteria (up to 6-log of reduction) was observed for the material with 500 mg of Ag NPs. AgCl NPs appeared to be less potent than Ag NPs, whereas Au NPs exhibited antibacterial activity only against MRSA and VRE. In addition, antiviral properties of materials were investigated on selected bacteriophages (MS2, phiX174, and fr). However, biocomposite materials with 500 mg of Ag NPs and AgCl NPs, as well as, 240 mg of Au NPs did not exhibit any activity against selected bacteriophages. Biocompatibility with human fibroblasts was evaluated through a direct contact assay for 3 and 7 days of exposure. High concentrations of metal NPs turned out to be cytotoxic for human fibroblasts, whereas the amount of 69 mg of Ag NPs in [CEL:KER] was low enough not to affect the viability of the fibroblasts after 3 days of exposure. Composites with Ag NPs and AgCl NPs were also tested for leachability of NPs out of the materials. Both types of NPs were leaching out in two different forms, as silver ions, and as colloidal silver. Leaching of ionic silver from both materials stabilised after 3 days, whereas colloidal silver was still leaching out on the 7th day. The overall percentage of the total silver (ionic + colloidal) leached was only 0.04 % of silver incorporated in the material. In summary, this dissertation investigates alternative approaches for water treatment technologies, which could potentially serve as unit improvements of existing technologies, or as on-point pre-treatment technologies to facilitate further conventional water treatment techniques. It also demonstrates the suitability of μFIA-TLM for fast screening measurements in aquatic samples, offering high sample throughput, simple handling of the samples and superior sensitivity over the UV-Vis spectrophotometry.
Najdeno v: ključnih besedah
Povzetek najdenega: ...Moreover, the suitability of microfluidic flow injection analysis coupled with thermal lens microscopy (μFIA-TLM) as...
Ključne besede: Antibacterial biocomposites, nanomaterials, water treatment technologies, multidrug-resistant bacteria, iodinated contrast agents, thermal lens microscopy, flow-injection analysis, microfluidics
Objavljeno: 26.04.2017; Ogledov: 3906; Prenosov: 131
.pdf Polno besedilo (27,08 MB)

Iskanje izvedeno v 0 sek.
Na vrh