Repozitorij Univerze v Novi Gorici

Iskanje po repozitoriju
A+ | A- | Pomoč | SLO | ENG

Iskalni niz: išči po
išči po
išči po
išči po
* po starem in bolonjskem študiju

Opcije:
  Ponastavi


1 - 10 / 18
Na začetekNa prejšnjo stran12Na naslednjo stranNa konec
1.
Max-type reliability in uncertain post-disaster networks through the lens of sensitivity and stability analysis
Ahmad Hosseini, 2024, izvirni znanstveni članek

Opis: The functionality of infrastructures, particularly in densely populated areas, is greatly impacted by natural disasters, resulting in uncertain networks. Thus, it is important for crisis management professionals and computer-based systems for transportation networks (such as expert systems) to utilize trustworthy data and robust computational methodologies when addressing convoluted decision-making predicaments concerning the design of transportation networks and optimal routes. This study aims to evaluate the vulnerability of paths in post-disaster transportation networks, with the aim of facilitating rescue operations and ensuring the safe delivery of supplies to affected regions. To investigate the problem of links' tolerances in uncertain networks and the resiliency and reliability of paths, an uncertainty theory-based model that employs minmax optimization with a bottleneck objective function is used. The model addresses the uncertain maximum reliable paths problem, which takes into account uncertain risk variables associated with links. Rather than using conventional methods for calculating the deterministic tolerances of a single element in combinatorial optimization, this study introduces a generalization of stability analysis based on tolerances while the perturbations in a group of links are involved. The analysis defines set tolerances that specify the minimum and maximum values that a designated group of links could simultaneously fluctuate while maintaining the optimality of the max-type reliable paths. The study shows that set tolerances can be considered as well-defined and proposes computational methods to calculate or bound such quantities - which were previously unresearched and difficult to measure. The model and methods are demonstrated to be both theoretically and numerically efficient by applying them to four subnetworks from our case study. In conclusion, this study provides a comprehensive approach to addressing uncertainty in reliability problems in networks, with potential applications in various fields.
Ključne besede: Disaster Management, Network Reliability, Stability Analysis, Transportation, Uncertainty
Objavljeno v RUNG: 24.11.2023; Ogledov: 407; Prenosov: 3
URL Povezava na datoteko
Gradivo ima več datotek! Več...

2.
Performance of copper - based catalysts for electrochemical CO2 reduction
Stefan Popović, 2023, doktorska disertacija

Opis: The industrial era has brought a never-ending problem to civilization through the emission of greenhouse gases (GHGs) while extracting energy from fossil fuels for a variety of processes. Among different GHGs, carbon dioxide (CO2) stood out as one of the most impactful and dangerous gases causing climatic disasters around the globe. However, CO2 as the abundant C1 building block, through the conversion pathways gives a plethora of opportunities to convert it into a wide range of commercial products and applications. The holistic approach among different conversion pathways is the electrochemical reduction of CO2 (eCO2R), ideally powered by renewable energy from intermittent sources such as wind and solar power. A silver bullet of the process is to find a catalyst that is active, selective, and stable. Copper has been recognized as the only monometallic catalyst that can produce products that require a transfer of >2e-. However, in recent years the increased awareness of its reconstructive nature under eCO2RR-relevant conditions multiplied the complexity of the parameters that can influence the reaction. Therefore overall thesis's approach to studying copper-based catalysts is based to understand the reconstructive aspect and the stability of Cu-based catalysts, and deeply comprehend their relationship with the activity/selectivity. Chapter 1 gives an introduction to the recent activities in the field of carbon capture, utilization and storage (CCSU) technologies, the fundaments of CO2 as a molecule, and its pathway toward state-of-the-art discoveries in the eCO2 R reaction. Afterward, the thesis focuses on the main experimental technique to produce nanostructured copper-based materials, namely, electrodeposition (Chapter 2). A big part of the thesis focuses on the establishment of an electrochemical setup for activity/selectivity measu rement. The setup consists of two parts: 1) construction of the custom-made gas-tight sandwich-type electrochemical cell and 2) optimization of the online gas and ex-situ liquid product detection. After the establishment of the reliable electrochemical setup, Chapter 3 focuses on electrochemically -grown Cu2O nanocubes catalyst and how the reconstructive nature induced by a particular electrochemical protocol influences on boost in activity/selectivity for methane production. The last part of the thesis consists contribution to the fundamental understanding of the degradation mechanisms and stability of Cu -based catalysts under eCO2RR conditions. A unique ex-situ approach, mirrored in identical location scanning electron microscopy (IL-SEM) method is employed to study electrodeposited spherical half-micron particles on the glassy carbon rotating disk electrode (GC-RDE). With this evidence, we could interpret the observed structural changes as two separate electrochemical processes occurring one after another, namely copper dissolution from pre-oxidized native nanoparticles and subsequent (electro -) redeposition of the dissolved copper species in a form of n ew smaller Cu fragments.
Ključne besede: electrocatalysts, electrochemical CO2 reduction, copper nanoparticles, IL-SEM, stability, degradation
Objavljeno v RUNG: 14.11.2023; Ogledov: 635; Prenosov: 11
.pdf Celotno besedilo (5,55 MB)

3.
Connectivity reliability in uncertain networks with stability analysis
Ahmad Hosseini, Eddie Wadbro, 2016, izvirni znanstveni članek

Ključne besede: Traffic network, Uncertainty theory, Reliability, Chance-constrained, Stability analysis
Objavljeno v RUNG: 14.02.2023; Ogledov: 842; Prenosov: 0
Gradivo ima več datotek! Več...

4.
5.
Tracking the reversibility of Ni redox states in Ni(OH)[sub]2 oxygen evolution electrocatalyst at high current density
Andraž Mavrič, Mattia Fanetti, Matjaž Valant, Chunhua Cui, 2021, objavljeni povzetek znanstvenega prispevka na konferenci

Ključne besede: oxygen evolution reaction, spectroelectrochemistry, nickel hydroxide, stability, amorphization
Objavljeno v RUNG: 29.11.2021; Ogledov: 1710; Prenosov: 0
Gradivo ima več datotek! Več...

6.
7.
Structural, morphological and chemical properties of metal/topological insulator interfaces : dissertation
Katja Ferfolja, 2021, doktorska disertacija

Opis: Topological insulators (TIs) represent a new state of matter that possess a different band structure than regular insulators or conductors. They are characterized with a band gap in the bulk and conductive topological states on the surface, which are spin polarized and robust toward contamination or deformation of the surface. Since the intriguing properties of the TIs are localized at the surface, it is important to obtain knowledge of the possible phenomena happening at the interface between TIs and other materials. This is especially true in the case of metals, due to the fact that such interfaces will be present in the majority of foreseen TI applications. The presented study combines microscopy and spectroscopy techniques for characterization of morphology, stability and chemical interaction at the interface between TI and metals deposited by means of physical vapor deposition. Our research is based on the interface of Bi2Se3 topological insulator with Ag, Ti and Pt – metals that can be encountered in devices or applications predicted to utilize the special properties of topological insulators. STM and SEM imaging of Ag/Bi2Se3 interface showed that Ag atoms arrange on the surface in the form of islands, whereas significantly bigger agglomerates are found at the surface steps. The interface was found to be unstable in time and resulted in the absorption of the metal into the crystal at room temperature. Evidences of a chemical reaction at the Ag/Bi2Se3 interface are presented, showing that new phases (Ag2Se, AgBiSe2 and metallic Bi) are formed. Deposition of Ti on Bi2Se3 resulted in different morphologies depending on the film thickness. At a very low coverage (<1 Å) islands are formed. However, the islands growth is hindered before the completion of a full layer due to the occurrence of a chemical reaction. No surface features could be detected by SEM for Ti coverage up to 20 nm. In contrary, when Ti thickness reached 40 nm, compressive stress triggered buckling of the deposited film. XPS analysis revealed that a redox solid-state reaction occurs at the Ti/Bi2Se3 interface at room temperature forming titanium selenides and metallic Bi. The reaction has significant kinetics even at cryogenic temperature of 130 K. Pt forms a homogenous film over the whole substrate surface, which is stable in time at room temperature. Although the interface of Pt with Bi2Se3 was found to be i less reactive compared to Ag and Ti, an interfacial phase formed upon annealing to ∼90 °C was detected by TEM cross section experiment. A model for prediction of interfacial reactions between a metal and Bi2Se3 based on the standard reduction potential of the metals and Gibbs free energy for a model reaction is presented. Based on these two values the reaction can be expected to result in the formation of binary and/or ternary selenides and Bi. Presented work shows on the importance of metal/topological insulator interfaces characterization taking into account the possibility of a chemical reaction with all of its consequences. Results should be considered for future theoretical and applicative studies involving such interfaces as well as for the possible engineering of 2D TI heterostructures.
Ključne besede: topological insulators, topological surface states, Bi2Se3, thin films, Ag, Ti, Pt, morphology, interfaces, solid-state reaction, metal selenides, reactivity, stability, electron microscopy, dissertations
Objavljeno v RUNG: 09.06.2021; Ogledov: 3571; Prenosov: 173
URL Povezava na celotno besedilo
Gradivo ima več datotek! Več...

8.
9.
10.
Iskanje izvedeno v 0.06 sek.
Na vrh