Repozitorij Univerze v Novi Gorici

Izpis gradiva
A+ | A- | Pomoč | SLO | ENG

Naslov:Anaerobic Co-Digestion of Ligno-Cellulosic degradation products - Wood Resin Residue from Tannin Production
Avtorji:ID Zupančič, Gregor Draago (Avtor)
ID Panjicko, Mario (Avtor)
ID Eršek, Domagoj (Avtor)
ID Lukić, Goran (Avtor)
ID Velišček, Žiga (Avtor)
ID Gojun, Martin (Avtor)
Datoteke: Gradivo nima datotek, ki so prostodostopne za javnost. Gradivo je morda fizično dosegljivo v knjižnici fakultete, zalogo lahko preverite v COBISS-u. Povezava se odpre v novem oknu
Jezik:Angleški jezik
Vrsta gradiva:Delo ni kategorizirano
Tipologija:1.08 - Objavljeni znanstveni prispevek na konferenci
Organizacija:UNG - Univerza v Novi Gorici
Opis:Tannin is a very versatile industrial material used for many applications. During tannin production, a residue is produced, which consists of 10 – 15 % sodium acetate solution with up to 10 % water-soluble wood resins by mass. Since it contains a high portion of acetate, it can be useful for anaerobic digestion to produce biomethane, whereas wood resins may exhibit inhibitory effects. In order to test the biodegradability of wood resin residue, several batch tests were performed with two approaches. In the first approach, co-digestion with corn-silage and animal waste was performed utilizing suspended biomass inoculum. In the second approach, co-digestion with pulp and paper wastewater was performed utilizing granular biomass inoculum. In the first approach, the results showed partial inhibition of degradation using mixtures of 25.6 % and total inhibition using 100.0 % of wood resin. Maximum biodegradability achieved was 83.4 %. In the second approach, the results showed partial inhibition of degradation using mixtures of 1.7 and 3.3 % of wood resin. Maximum biodegradability achieved was 64.3 %. Because the second approach enabled us to process larger quantities of wood resin (larger COD load), a pilot experiment of anaerobic co-digestion with pulp and paper wastewater was performed, utilising similar conditions to the considered full-scale treatment. The results showed COD degradation between 70.1 and 81.7 % and a potential increase in total produced biomethane of 36 – 39 %, with no significant adverse effects. Wood resin residue yielded 45 – 50 m3 of biomethane per tonne, which exhibits a good potential for biomethane production. If used for biomethane production in pulp and paper wastewater treatment, the valorisation value of the wood resin residue is between 54,500 € and 94,000 €, which makes the presented treatment also an economically viable option.
Ključne besede:Anaerobic digestion, biomethane production, wood resin residue
Status publikacije:Objavljeno
Leto izida:2018
Št. strani:11
PID:20.500.12556/RUNG-5074-7f64d96a-b465-a375-5c23-df45e4fc6707 Novo okno
COBISS.SI-ID:5590267 Novo okno
NUK URN:URN:SI:UNG:REP:L1LFJIBG
Datum objave v RUNG:11.03.2020
Število ogledov:3173
Število prenosov:0
Metapodatki:XML RDF-CHPDL DC-XML DC-RDF
:
Kopiraj citat
  
Skupna ocena:(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del monografije

Naslov:Online digital proceedings
Uredniki:Mateja Ban, Neven Duić, Ilija Bataš Bijelić, Nikola Rajaković, Daniel Rolph Schneider, Zvonimir Guzović, Mario Costa, Jiri Klemeš, Petar Varbanov, Zvonimir Petranović, Arne Ragossnig, Holger Schlor, Sandra Venghaus, Milan Vujanović
Kraj izida:Novi Sad
Leto izida:2018
Prireditelj konference:Sdewes
ISSN zbirke:1847-7178

Nazaj