Repozitorij Univerze v Novi Gorici

Izpis gradiva
A+ | A- | Pomoč | SLO | ENG

Naslov:THE CALIBRATION PROCESS OF A MANUFACTURING LINE IN THE AUTOMOTIVE INDUSTRY
Avtorji:ID Kocijan, Juš (Mentor) Več o mentorju... Novo okno
ID Kuzmanovski, Aleksandar (Avtor)
Datoteke:.pdf Aleksandar_Kuzmanovski.pdf (2,07 MB)
MD5: 5D349D289148F366580C27BFF02345F9
 
Jezik:Angleški jezik
Vrsta gradiva:Diplomsko delo/naloga
Tipologija:2.11 - Diplomsko delo
Organizacija:PTF - Poslovno-tehniška fakulteta
Opis:Calibration of measuring instruments in the industry is a process that is done regularly both internally by internal laboratories operating within the companies and externally by accredited external laboratories. The goal of the diploma thesis was to document and carry out the calibration process of a production line within a manufacturing plant, and to deliver a final report on the overall calibration. The result is obtained by calculating the combined uncertainty of the measurement process. As any measurement is gathered certain uncertainties are bound to influence the measurements, in our case we have three main uncertainties which are the standard uncertainty, uncertainty due to the resolution of the measuring instrument and the uncertainty from the calibration certificate from the measuring equipment that is used in the measurement process. The final combined uncertainty is calculated with the standard uncertainty which has a 68% confidence that the true value lies within that range therefore we need to expand the range to obtain a 95% confidence and we achieve this by multiplication of the combined uncertainty with the K = 2 factor.
Ključne besede:Metrology, calibration, adjustment, measurement errors, measurement uncertainty, measuring instruments, measuring equipment.
Kraj izida:Nova Gorica
Leto izida:2022
PID:20.500.12556/RUNG-7699 Novo okno
COBISS.SI-ID:136338179 Novo okno
NUK URN:URN:SI:UNG:REP:MLEMA8R0
Datum objave v RUNG:05.01.2023
Število ogledov:2747
Število prenosov:51
Metapodatki:XML DC-XML DC-RDF
:
KUZMANOVSKI, Aleksandar, 2022, THE CALIBRATION PROCESS OF A MANUFACTURING LINE IN THE AUTOMOTIVE INDUSTRY [na spletu]. Diplomsko delo. Nova Gorica. [Dostopano 3 april 2025]. Pridobljeno s: https://repozitorij.ung.si/IzpisGradiva.php?lang=slv&id=7699
Kopiraj citat
  
Skupna ocena:
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share


Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Sekundarni jezik

Jezik:Slovenski jezik
Naslov:Postopek kalibracije proizvodne linije v avtomobilski industriji
Opis:Kalibracija merilnih instrumentov v industriji je proces, ki ga redno interno izvajajo laboratoriji v podjetju in zunanji akreditirani laboratoriji. Cilj diplomskega dela je bil dokumentirati in izvesti postopek kalibracije proizvodne linije v proizvodnem obratu ter izdelati končno poročilo o celotni kalibraciji. Rezultat kalibracijske meritve dobimo z izračunom skupne negotovosti merilnega postopka. Ko so vsemeritve zbrane, določene negotovosti prav gotovo vplivajo na meritve. V našem primeru vplivajo tri glavne negotovosti. Te negotovosti so: standardna negotovost, negotovost zaradi ločljivosti merilnegainstrumenta in negotovost, ki jo določa potrdilo o kalibraciji merilne opreme, ki se uporablja za kalibracijo. Končna kombinirana negotovost meritev se izračuna s standardno negotovostjo, ki ima 68-odstotno zaupanje, da je prava vrednost znotraj z negotovostjo določenega območja. Da bi dobili 95-odstotno zaupanje, moramo območje razširiti. To pa dosežemo z množenjem kombinirane negotovosti z vrednostjo 2.
Ključne besede:Metrologija, kalibracija, prilagajanje, merilne napake, merilna negotovost, merilni instrumenti, merilna oprema.


Nazaj