41. |
42. Knjiga povzetkov2009, zbornik strokovnih ali nerecenziranih znanstvenih prispevkov na konferenci Ključne besede: povzetki, zborniki, CD-ROM Objavljeno v RUNG: 22.04.2022; Ogledov: 1468; Prenosov: 0 |
43. |
44. Coevaporation of doped inorganic carrier-selective layers for high-performance inverted planar perovskite solar cellsJiexuan Jiang, Andraž Mavrič, Nadiia Pastukhova, Matjaž Valant, Qiugui Zeng, Zeyu Fan, Beibei Zhang, Yanbo Li, 2022, izvirni znanstveni članek Opis: Inorganic carrier selective layers (CSLs), whose conductivity can be effectively tuned by doping, offer low-cost and stable alternatives for their organic counterparts in perovskite solar cells (PSCs). Herein, we employ a dual-source electron-beam co-evaporation method for the controlled deposition of copper-doped nickel oxide (Cu:NiO) and tungsten-doped niobium oxide (W:Nb2O5) as hole and electron transport layers, respectively. The mechanisms for the improved conductivity using dopants are investigated. Owing to the improved conductivity and optimized band alignment of the doped CSLs, the all-inorganic-CSLs-based PSCs achieves a maximum power conversion efficiency (PCE) of 20.47%. Furthermore, a thin titanium buffer layer is inserted between the W:Nb2O5 and the silver electrode to prevent the halide ingression and improve band alignment. This leads to a further improvement of PCE to 21.32% and a long-term stability (1200 h) after encapsulation. Finally, the large-scale applicability of the doped CSLs by co-evaporation is demonstrated for the device with 1 cm2 area showing a PCE of over 19%. Our results demonstrate the potential application of the co-evaporated CSLs with controlled doping in PSCs for commercialization. Ključne besede: carrier selective layers, Cu-doped nickel oxide, electron-beam evaporation, perovskite solar cells, W-doped niobium oxide Objavljeno v RUNG: 17.03.2022; Ogledov: 2027; Prenosov: 121 Celotno besedilo (1,38 MB) Gradivo ima več datotek! Več... |
45. Plastic Waste Precursor-Derived Fluorescent Carbon and Construction of Ternary FCs@CuO@TiO2 Hybrid Photocatalyst for Hydrogen Production and Sensing ApplicationAkansha Metha, Rayees Ahmad Rather, Blaž Belec, Sandra Gardonio, Ming Fang, Matjaž Valant, 2022, izvirni znanstveni članek Opis: A sustainable nexus between renewable energy production and plastic abatement is imperative for overall sustainable development. In this regard, this study aims to develop a cheaper and environmentally friendly nexus between plastic waste management, wastewater treatment, and renewable hydrogen production. Fluorescent carbon (FCs) were synthesized from commonly used LDPE (low-density polyethylene) by a facile hydrothermal approach. Optical absorption study revealed an absorption edge around 300 nm and two emission bands at 430 and 470 nm. The morphological analysis showed two different patterns of FCs, a thin sheet with 2D morphology and elongated particles. The sheet-shaped particles are 0.5 μm in size, while as for elongated structures, the size varies from 0.5 to 1 μm. The as-synthesized FCs were used for the detection of metal ions (reference as Cu2+ ions) in water. The fluorescence intensity of FCs versus Cu2+ ions depicts its upright analytical ability with a limit of detection (LOD) reaching 86.5 nM, which is considerably lesser than earlier reported fluorescence probes derived from waste. After the sensing of Cu2+, the as-obtained FCs@Cu2+ was mixed with TiO2 to form a ternary FCs@CuO@TiO2 composite. This ternary composite was utilized for photocatalytic hydrogen production from water under 1.5 AM solar light irradiation. The H2 evolution rate was found to be ~1800 μmolg−1, which is many folds compared to the bare FCs. Moreover, the optimized FCs@CuO@TiO2 ternary composite showed a photocurrent density of ~2.40 mA/cm2 at 1 V vs. Ag/AgCl, in 1 M Na2SO4 solution under the illumination of simulated solar light. The achieved photocurrent density corresponds to the solar-to-hydrogen (STH) efficiency of ~0.95%. The efficiency is due to the fluorescence nature of FCs and the synergistic effect of CuO embedded in TiO2, which enhances the optical absorption of the composite by reaching the bandgap of 2.44 eV, apparently reducing the recombination rate, which was confirmed by optoelectronic, structural, and spectroscopic characterizations. Ključne besede: plastic waste, fluorescent carbo, sensing of metal ions, photocatalytic hydrogen production Objavljeno v RUNG: 25.02.2022; Ogledov: 1834; Prenosov: 43 Celotno besedilo (5,98 MB) |
46. Electrolysis energy efficiency of highly concentrated FeCl[sub]2 solutions for power-to-solid energy storage technologyUroš Luin, Matjaž Valant, 2022, izvirni znanstveni članek Opis: An electrochemical cycle for the grid energy storage in the redox potential of Fe involves the electrolysis of a highly concentrated aqueous FeCl2 solution yielding solid iron deposits. For the high overall energy efficiency of the cycle, it is crucial to maximize the energy efficiency of the electrolysis process. Here we present a study of the influence of electrolysis parameters on the energy efficiency of such electrolysis, performed in an industrial-type electrolyzer. We studied the conductivity of the FeCl2 solution as a function of concentration and temperature and correlated it with the electrolysis energy efficiency. The deviation from the correlation indicated an important contribution from the conductivity of the ion-exchange membrane. Another important studied parameter was the applied current density. We quantitatively showed how the contribution of the resistance polarization increases with the current density, causing a decrease in overall energy efficiency. The highest energy efficiency of 89 ± 3% was achieved using 2.5 mol L−1 FeCl2 solution at 70 °C and a current density of 0.1 kA m−2. In terms of the energy input per Fe mass, this means 1.88 Wh g−1. The limiting energy input per mass of the Fe deposit was found to be 1.76 Wh g−1. Ključne besede: electrolysis, ferrous chloride, iron deposition, energy efficiency Objavljeno v RUNG: 16.02.2022; Ogledov: 1896; Prenosov: 75 (1 glas) Celotno besedilo (1,99 MB) Gradivo ima več datotek! Več... |
47. Structure and population of complex ionic species in FeCl[sub]2 aqueous solution by X-ray absorption spectroscopyUroš Luin, Iztok Arčon, Matjaž Valant, 2022, izvirni znanstveni članek Opis: Technologies for mass production require cheap and abundant materials such as ferrous chloride (FeCl2). The literature survey shows the lack of experimental studies to validate theoretical conclusions related to the population of ionic Fe-species in the aqueous FeCl2 solution. Here, we present an in situ X-ray absorption study of the structure of the ionic species in the FeCl2 aqueous solution at different concentrations (1–4 molL−1) and temperatures (25–80 ◦C). We found that at low temperature and low FeCl2 concentration, the octahedral first coordination sphere around Fe is occupied by one Cl ion at a distance of 2.33 (±0.02) Å and five water molecules at a distance of 2.095 (±0.005) Å. The structure of the ionic complex gradually changes with an increase in temperature and/or concentration. The apical water molecule is substituted by a chlorine ion to yield a neutral Fe[Cl2(H2O)4]0. The observed substitutional mechanism is facilitated by the presence of the intramolecular hydrogen bonds as well as entropic reasons. The transition from the single charged Fe[Cl(H2O)5]+ to the neutral Fe[Cl2(H2O)4]0 causes a significant drop in the solution conductivity, which well correlates with the existing conductivity models. Ključne besede: structure, population, ionic species, aqueous ferrous chloride, in situ X-ray absorption spectroscopy Objavljeno v RUNG: 24.01.2022; Ogledov: 1941; Prenosov: 42 (1 glas) Povezava na celotno besedilo Gradivo ima več datotek! Več... |
48. Ultra-low-cost, flexible and durable electrochromic tape device based on aluminum foilMartin Rozman, Andraž Mavrič, Gregor Kravanja, Matjaž Valant, Amirhossein Pakseresht, 2022, izvirni znanstveni članek Ključne besede: electrochromism, Li-WO3 intercalation, flexible tape, aluminum electrode, low-cost Objavljeno v RUNG: 03.01.2022; Ogledov: 1764; Prenosov: 3 Celotno besedilo (6,70 MB) |
49. Enhancing the mechanical properties of biodegradable Mg alloys processed by warm HPT and thermal treatmentsAndrea Mizelli-Ojdanic, Jelena Horky, Bernhard Mingler, Mattia Fanetti, Sandra Gardonio, Matjaž Valant, Bartosz Sulkowski, Erhard Schafler, Dmytro Orlov, Michael J. Zehetbauer, 2021, izvirni znanstveni članek Ključne besede: severe plastic deformation, SPD, precipitates, vacancy agglomerates, magnesium alloys, biodegradability Objavljeno v RUNG: 03.12.2021; Ogledov: 1820; Prenosov: 44 Povezava na celotno besedilo |
50. |