Iskanje po repozitoriju

A+ | A- | | SLO | ENG

Opis: Plastics are based on organic polymers that are sensitive to the environment in which they find themselves and will gradually decay through a variety of chemical reactions. This process is of great importance for the transformation and persistence of microplastics (MPs) that pollute the environment. The rate of degradation depends on two major factors: Firstly, the intrinsic properties of the polymers, such as chemical structure, molecular weight, crystallinity and the presence of additives, fillers or reinforcement and secondly, the environment to which they are exposed. The degradation rate of plastic will vary in different environmental matrices like soil, freshwater, seawater, wastewater, land etc., as well as in diverse environmental conditions like UV radiation, temperature, humidity, the effect of pollutants etc. Plastic mainly undergoes two fundamental reactions: oxidation and hydrolysis and the chemical structure of the polymer and its additives plays a key role in the degradation mechanism of plastic. Polyolefins having a carbon-only main chain are resistant to hydrolysis but susceptible to oxidation, whereas polyesters and polyamides containing heteroatoms are sensitive to hydrolysis and much more resistant to oxidation. In the context of the present work, five different studies were done involving both naturally degraded plastic and accelerated weathering of plastics in the form of small particles, MPs. In the first study, natural degraded polyethylene (PE) and polypropylene (PP) samples with a life span of more than forty years were collected from the environment and their physiochemical properties were analysed. The results show that red coloured PE samples were more degraded as compared to blue coloured samples, indicating that pigment plays a key role in the degradation. The PP sample shows extreme surface degradation, leading to fragmentation and the generation of MPs. In the second study, the effect of hydrodynamic cavitation on MPs in waste water treatment plant sludge was evaluated. PE, PP, polyethylene terephthalate and polyamide were extracted from the sludge. It was found that hydrodynamic cavitation does not disintegrate the MPs, although it removes some toxic metals and shows cell disruption mechanisms. Other studies were done with accelerated weathered MPs, which include PE, PP and tire wear particles (TWP), that were treated in accordance with an ISO 4892 standard weathering procedure that mimics natural weathered conditions. In the third study, we used weathered PE films to evaluate the synergistic adsorption behaviour of two pollutants, namely triclosan (TCS) and methylparaben (MeP). It was found that weathered MPs adsorb more pollutants and the adsorption behaviour of TCS is enhanced in the presence of MeP. In the fourth study, the magnetic extraction of pristine and weathered PE and TWP particles was performed. The results confirmed that the magnetic VI extraction of weathered MPs is difficult as compared to pristine MPs as their surface becomes more hydrophilic with weathering. In the fifth study, the effect of weathering on the density of PE and PP was evaluated. We found that weathering enhances the density of polyolefins, which is one of the main reasons for the observed sinking of polyolefin MPs in water.
Ključne besede: accelerated weathering, aging, density, magnetic separation, pigment, plastic degradation, pollutants, polyethylene, polyolefin, polypropylene, sinking, tire wear particles, dissertations
Objavljeno v RUNG: 04.06.2024; Ogledov: 345; Prenosov: 0
Celotno besedilo (7,35 MB)

Opis: Oxygen vacancies (OVs) are one of the most critical factors that enhance the electrical and catalytic characteristics of metal oxide-based photo-electrodes. In this work, a simple procedure was applied to prepare reduced TiO 2 nanotube arrays (NTAs) (TiO 2−x) via a one-step reduction method using NaBH 4. A series of characterization techniques were used to study the structural, optical, and electronic properties of TiO 2−x NTAs. X-ray photoelectron spectroscopy confirmed the presence of defects in TiO 2−x NTAs. Photoacoustic measurements were used to estimate the electron-trap density in the NTAs. Photoelectrochemical studies show that the photocurrent density of TiO 2−x NTAs was nearly 3 times higher than that of pristine TiO 2. It was found that increasing OVs in TiO 2 affects the surface recombination centers, enhances electrical conductivity, and improves charge transport. For the first time, a TiO 2−x photoanode was used in the photo-electrochemical (PEC) degradation of a textile dye (basic blue 41, B41) and ibuprofen (IBF) pharmaceutical using in situ generated reactive chlorine species (RCS). Liquid chromatography coupled with mass spectrometry was used to study the mechanisms for the degradation of B41 and IBF. Phytotoxicity tests of B41 and IBF solutions were performed using Lepidium sativum L. to evaluate the potential acute toxicity before and after the PEC treatment. The present work provides efficient PEC degradation of the B41 dye and IBF in the presence of RCS without generating harmful products.
Ključne besede: TiO2, nanotube arrays, photoelectrochemical degradation, organic pollutants
Objavljeno v RUNG: 12.06.2023; Ogledov: 1217; Prenosov: 7
Celotno besedilo (4,22 MB)
Gradivo ima več datotek! Več...

Opis: Plastic resin pellets, categorized as microplastics (≤5 mm in diameter), are small granules that can be unintentionally released to the environment during manufacturing and transport. Because of their environmental persistence, they are widely distributed in the oceans and on beaches all over the world. They can act as a vector of potentially toxic organic compounds (e.g., polychlorinated biphenyls) and might consequently negatively affect marine organisms. Their possible impacts along the food chain are not yet well understood. In order to assess the hazards associated with the occurrence of plastic pellets in the marine environment, it is necessary to develop methodologies that allow for rapid determination of associated organic contaminant levels. The present protocol describes the different steps required for sampling resin pellets, analyzing adsorbed organochlorine pesticides (OCPs) and identifying the plastic type. The focus is on the extraction of OCPs from plastic pellets by means of a pressurized fluid extractor (PFE) and on the polymer chemical analysis applying Fourier Transform-InfraRed (FT-IR) spectroscopy. The developed methodology focuses on 11 OCPs and related compounds, including dichlorodiphenyltrichloroethane (DDT) and its two main metabolites, lindane and two production isomers, as well as the two biologically active isomers of technical endosulfan. This protocol constitutes a simple and rapid alternative to existing methodology for evaluating the concentration of organic contaminants adsorbed on plastic pieces.
Ključne besede: Environmental Sciences, Issue 125, Microplastics, resin pellets, pesticides, persistent organic pollutants, organochlorine pesticides, dichlorodiphenyltrichloroethane, endosulfan, hexachlorocyclohexane, lindane, Fourier transform infrared spectroscopy, pressurized fluid extractor
Objavljeno v RUNG: 10.07.2017; Ogledov: 4678; Prenosov: 0