Repository of University of Nova Gorica

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in
* old and bolonia study programme

Options:
  Reset


1 - 10 / 12
First pagePrevious page12Next pageLast page
1.
Soot as a precursor for the low temperature synthesis of organometallic sodium carbide
SANKARARAMAN S, SARITHA DEVI H V, SWAPNA MOHANACHANDRAN NAIR SINDHU, 2019, original scientific article

Abstract: The carbonaceous soot finds a wide range of applications in many fields due to the richness of various allotropes of carbon. The present work explores the possibility of least investigated sodium carbide (Na2C2) as a potential semiconducting material for photonic applications. The soot, formed by the incomplete combustion of gingelly oil is taken as the carbon precursor for the low-temperature synthesis of the industrially significant organometallic Na2C2. The morphological modifications are analyzed using High-Resolution Transmission Electron Microscope and elemental study is carried out by Energy Dispersive Spectroscopy and x-ray dot mapping. The formation of Na2C2 is primarily identified from x-ray powder diffraction pattern and further confirmed by other structural and thermal analysis techniques such as Fourier Transform Infrared, Raman spectroscopy, and Thermogravimetry. The region of optical absorption, bandgap, as well as its emission properties are studied by recording the Ultraviolet-Visible and Photoluminescence spectrum. The Tauc plot analysis suggests its semiconducting nature with direct bandgap energy of 2.08 eV. The analysis with the help of CIE, and power spectrum reveal a prominent blue emission around 440 nm irrespective of excitation in the UV region. Thus, the major highlights of this work lie in two factors- firstly, the effective utilization of the soot and secondly, easier low-temperature and cost-effective synthesis of semiconducting Na2C2 for photonic applications.
Found in: osebi
Keywords: carbonaceous soot, sodium carbide, photonic applications
Published: 05.07.2022; Views: 116; Downloads: 0
.pdf Fulltext (1,33 MB)

2.
Optical emission diagnosis of carbon nanoparticle incorporated chlorophyll for sensing applications
SANKARARAMAN S, SARITHA DEVI H V, RAJ VIMAL, SWAPNA MOHANACHANDRAN NAIR SINDHU, 2019, original scientific article

Abstract: Chlorophyll fluorescence (Chl F) is widely used in sensing applications to understand terrestrial vegetation and environmental and climatic variations. The increasing rates of industrialization and carbon emission from internal combustion engines (ICEs) pose a threat to sustainable development. This study analyses the impact of carbon nanoparticles (CNPs) from ICEs on the optical absorption and fluorescence emission of leaf pigments. Leaf pigments without and with CNPs were subjected to UV-visible and photoluminescence (PL) spectroscopy analyses. The field emission scanning electron microscopy and highresolution transmission electron microscopy images of CNPs showed their morphology. The Jablonski diagram of the CNP-incorporated chlorophyll system helped in understanding the fluorescence emission,internal conversion, and the exchange of energy between them. The variations in (i) total chlorophyll, (ii) optical absorbance by total chlorophyll, (iii) PL emission peak (at 675 nm and 718 nm) intensities for different excitation wavelengths, and (iv) normalized absorbance at the PL emission peaks with different CNP concentrations were analysed by dividing into three regions. In Region I (0–0.625 mg ml−1 ), the radiative component dominated the nonradiative component as a result of energy transfer from CNPs to chlorophyll. In Region II (0.625–1.2 mg ml−1 ), the increase in CNP concentration initiated diffusion into chloroplasts, resulting in the increase in the nonradiative part of total energy and decrease in PL peak intensity. In Region III (1.2–2.5 mg ml−1 ), the energy absorbed by the CNPs dissipated more nonradiatively, leading to a slow rate of increase in the radiative part. The visual response of PL emission, color purity, and the distribution of the emitted energy over the spectrum studied with the help of CIE plots, power spectrum, and confocal fluorescence microscopy revealed the fluorescence emission in the red region. This study suggests the possibility of employing Chl F in agricultural, environmental, and biological fields for sensing applications.
Found in: osebi
Keywords: carbon nanoparticle, optical emission, fluorescence
Published: 05.07.2022; Views: 72; Downloads: 0
.pdf Fulltext (1,92 MB)

3.
Tunable fluorescence from natural carbon source- Pandanus
SANKARARAMAN S, AMBADAS G, SARITHA DEVI H V, SWAPNA MOHANACHANDRAN NAIR SINDHU, 2019, original scientific article

Abstract: Carbon materials possessing photoluminescence properties are considered as potential candidates in a wide range of photonic and optoelectronic applications. In this work, the cellulose derived from the natural source, Pandanus, is autoclave-treated for the synthesis of fluorescent carbon. The natural fibres are greatly preferred over synthetic ones due to their cost-effectiveness, easy processability, non-abrasivity, non-toxic and environmentfriendly characteristics along with high mechanical strength and damage tolerance. These properties enable them to be used as templates for synthesis, as important reinforcement materials for commercial thermoplastics and for making value-added products. In this study, the synthesised sample is subjected to structural, morphological, elemental and optical characterisations. These studies reveal that the sample can be used as a low-cost tunable light-emitting source for photonic, biomedical and biosensing applications.
Found in: osebi
Keywords: Fluorescence, Pandanus, natural carbon, cellulose
Published: 04.07.2022; Views: 81; Downloads: 0
.pdf Fulltext (1,58 MB)

4.
Fractal and spectroscopic analysis of soot from internal combustion engines
SANKARARAMAN S, RAJ VIMAL, SARITHA DEVI H V, SWAPNA MOHANACHANDRAN NAIR SINDHU, 2018, original scientific article

Abstract: Today diesel engines are used worldwide for various applications and very importantly in transportation. Hydrocarbons are the most widespread precursors among carbon sources employed in the production of carbon nanotubes (CNTs). The aging of internal combustion engine is an important parameter in deciding the carbon emission and particulate matter due to incomplete combustion of fuel. In the present work, an attempt has been made for the effective utilization of the aged engines for potential applicationapplications in fuel cells and nanoelectronics. To analyze the impact of aging, the particulate matter rich in carbon content areis collected from diesel engines of different ages. The soot with CNTs is purified by the liquid phase oxidation method and analyzed by Field Emission Scanning Electron Microscopy, High-Resolution Transmission Electron Microscopy, Energy Dispersive Spectroscopy, UV-Visible spectroscopy, Raman spectroscopy and Thermogravimetric analysis. The SEM image contains self-similar patterns probing fractal analysis. The fractal dimensions of the samples are determined by the box counting method. We could find a greater amount of single-walled carbon nanotubes (SWCNTs) in the particulate matter emitted by aged diesel engines and thereby giving information about the combustion efficiency of the engine. The SWCNT rich sample finds a wide range of applications in nanoelectronics and thereby pointing a potential use of these aged engines.
Found in: osebi
Keywords: Fractals, internal combustion engine, efficiency, soot, carbon nanoparticle
Published: 30.06.2022; Views: 149; Downloads: 0
.pdf Fulltext (1,05 MB)

5.
Camphor soot: A Tunable Light Emitter
SANKARARAMAN S, SARITHA DEVI H V, SWAPNA MOHANACHANDRAN NAIR SINDHU, 2018, original scientific article

Abstract: The work in this paper is the first report on the green synthesis of the blue light emitter from waxy, flammable solid collected from Cinnamomum camphora by controlled combustion for photonic applications. Analysis with field emission scanning electron microscope and high-resolution transmission electron microscope provides the morphology, whereas the thermogravimetric analysis gives the thermal stability of the soot. The optical and structural characterizations are done by recording UV–Visible, Photoluminescent, and Raman Spectrum. The CIE plot and the power spectrum of the sample show a blue emission at an excitation of 350 nm at room temperature with a quantum yield of 46.15%. The dependence of luminescent behavior on temperature and excitation wavelength reveals that the material is a tunable blue emitter. This green synthesis of the blue light emitter is highly significant, when the world is in search of a simple, phosphor-free, non-toxic, cost-effective material with good quantum efficiency
Found in: osebi
Keywords: camphor, soot, blue light emitter
Published: 30.06.2022; Views: 110; Downloads: 0
.pdf Fulltext (2,16 MB)

6.
Boron‑rich boron carbide from soot
Sankaranarayana Iyer Sankararaman, H. V. Saritha Devi, Mohanachandran Nair Sindhu Swapna, 2020, original scientific article

Abstract: Boron carbide is a promising super-hard semiconducting material for refractory applications ranging from the nuclear industry to spacecraft. The present work is the frst report of not only turning futile soot, containing carbon allotropes in varying composition, into boron-rich boron carbide (BC), but also developing it by a low-cost, low-temperature, and green synthesis method. The BC synthesised from gingelly oil soot is subjected to structural, morphological, and optical characterisations. The feld emission scanning electron microscope shows beautiful fower-like morphology, and the thermogravimetric analysis reveals the high-temperature stability of the sample synthesised. The Tauc plot of the sample indicates a 2.38 eV direct bandgap. The formation of BC and boron-rich carbide evidenced by X-ray difraction studies is confrmed through Raman and Fourier transform infrared spectroscopic signatures of B–C and C–B–C bonds. The fuorescence, power spectrum, and CIE analyses carried out suggest the blue light emission for excitation at 350 nm
Found in: osebi
Keywords: boron carbide, soot, carbon nanoparticle, refractory, allotropes, green synthesis
Published: 30.06.2022; Views: 104; Downloads: 0
.pdf Fulltext (1,11 MB)

7.
Concentration-dependent thermal duality of hafnium carbide nanofluid for heat transfer applications
V. Gokul, Mohanachandran Nair Sindhu Swapna, Vimal Raj, H. V. Saritha Devi, Sankaranarayana Iyer Sankararaman, 2021, original scientific article

Abstract: he mode mismatch dual-beam thermal lens technique is a sensitive tool for studying the nanofuids’ thermal difusivity in thermal engineering. The work reports the low-temperature green synthesis of hafnium carbide (HfC) using rice four as a natural carbon precursor and its potential in heat transfer nanofuids by studying the concentration-dependent thermal difusivity. The structure characterisations confrm the formation of HfC, whose refractory nature is revealed through the high thermal stability observed in the thermogravimetric analysis. The Tauc plot analysis shows direct bandgap energy of 2.92 eV. The fuorescence study suggests bluish-pink emission with CIE coordinates (0.271, 0.263). The existence of the critical concentration of HfC in the nanofuid decides its suitability for heat transfer or heat trap applications indicating a concentration-dependent thermal duality. Thus, the study is signifcant as it overcomes the major drawbacks of the existing methods of the synthesis of refractory HfC, using toxic chemical and costly equipment for heat transfer applications.
Found in: osebi
Keywords: hafnium carbide, hydrothermal synthesis, rice flour, thermal lens spectroscopy
Published: 04.07.2022; Views: 84; Downloads: 0
.pdf Fulltext (1,50 MB)

8.
9.
10.
Search done in 0 sec.
Back to top