1. Uncertainty modeling and stability assessment of minimum spanning trees in network designAhmad Hosseini, 2024, original scientific article Abstract: The Minimum Spanning Tree (MST) problem in networks focuses on finding efficient routes, with applications in transportation, logistics, telecommunications, and more. However, catastrophes can make these networks uncertain, requiring robust computational models for decision-making. This paper introduces an uncertainty theory-based model to analyze the stability of MSTs in uncertain networks. By incorporating reliability and risk variables, we assess the robustness of uncertain MSTs (UMSTs) and address the challenge of computing link tolerances, which define the range within which network links can vary without compromising MST optimality. This study proposes computational formulations to systematically calculate these tolerances, offering a more efficient alternative to traditional re-optimization methods.
Keywords: operations research, transportation, sensitivity analysis, uncertainty, reliability
Published in RUNG: 03.12.2024; Views: 120; Downloads: 0
 Full text (1,10 MB)
This document has many files! More... |
2. Large-scale cosmic-ray anisotropies with 19 yr of data from the Pierre Auger ObservatoryA. Abdul Halim, P. Abreu, M. Aglietta, Ingo Allekotte, K. Almeida Cheminant, Jon Paul Lundquist, Shima Ujjani Shivashankara, Serguei Vorobiov, Danilo Zavrtanik, Marko Zavrtanik, 2024, original scientific article Abstract: We present results of the measurement of large-scale anisotropies in the arrival directions of
ultra–high-energy cosmic rays detected at the Pierre Auger Observatory during 19 yr of operation,
prior to AugerPrime, the upgrade of the observatory. The 3D dipole amplitude and direction are
reconstructed above 4 EeV in four energy bins. Besides the established dipolar anisotropy in right
ascension above 8 EeV, the Fourier amplitude of the 8–16 EeV energy bin is now also above the 5σ
discovery level. No time variation of the dipole moment above 8 EeV is found, setting an upper limit
to the rate of change of such variations of 0.3% per year at the 95% confidence level. Additionally,
the results for the angular power spectrum are shown, demonstrating no other statistically
significant multipoles. The results for the equatorial dipole component down to 0.03 EeV are
presented, using for the first time a data set obtained with a trigger that has been optimized for
lower energies. Finally, model predictions are discussed and compared with observations, based
on two source emission scenarios obtained in the combined fit of spectrum and composition above 0.6 EeV.
Keywords: ultra–high-energy cosmic rays, UHECRs, UHECR anisotropies, Pierre Auger Observatory, dipolar anisotropy in right ascension, Fourier amplitude analysis, angular power spectrum, equatorial dipole component, UHECR source emission scenarios
Published in RUNG: 26.11.2024; Views: 207; Downloads: 0
Full text (1,16 MB)
This document has many files! More... |
3. Foods2012 Keywords: food sciences and technology, food chemistry and physical properties, food engineering and production, food security and safety, food toxicology, sensory and food quality, food analysis, functional foods, food and health, food psychology, food and environment
Published in RUNG: 10.05.2024; Views: 1037; Downloads: 2
 Link to file
This document has many files! More... |
4. Exhaled volatile organic compounds and respiratory disease : recent progress and future outlookMaria Chiara Magnano, Waqar Ahmed, Ran Wang, Martina Bergant Marušič, Stephen J. Fowler, Iain R. White, 2024, review article Abstract: The theoretical basis of eVOCs as biomarkers for respiratory disease diagnosis is described, followed by a review of the potential biomarkers that have been proposed as targets from in vitro studies. The utility of these targets is then discussed based on comparison with results from clinical breath studies. The current status of breath research is summarised for various diseases, with emphasis placed on quantitative and targeted studies. Potential for bias highlights several important concepts related to standardization, including practices adopted for compound identification, correction for background inspired VOC levels and computation of mixing ratios. The compiled results underline the need for targeted studies across different analytical platforms to understand how sampling and analytical factors impact eVOC quantification. The impact of environmental VOCs as confounders in breath analysis is discussed alongside the potential that eVOCs have as biomarkers of air pollution exposure and future perspectives on clinical breath sampling are provided.
Keywords: breath analysis, disease diagnosis, exhaled volatile organic compounds, respiratory disease, environmental exposure analysis, breath analysis
Published in RUNG: 06.05.2024; Views: 1420; Downloads: 9
Full text (1,36 MB)
This document has many files! More... |
5. Synthesis of helional by hydrodechlorination reaction in the presence of mono- and bimetallic catalysts supported on aluminaOreste Piccolo, Iztok Arčon, Das Gangadhar, Giuliana Aquilanti, Andrea Prai, Stefano Paganelli, Manuela Facchin, Valentina Beghetto, 2024, original scientific article Abstract: Hydrodechlorination reaction of 3-(benzo-1,3-dioxol-5-yl)-3-chloro-2-methylacrylaldehyde in the presence of different low metal content heterogeneous mono- or bimetallic catalysts was tested for the synthesis of the fragrance Helional® (3-[3,4-methylendioxyphenyl]-2-methyl-propionaldehyde). In particular, mono Pd/Al2O3, Rh/Al2O3 or bimetallic Pd-Cu/Al2O3, Rh-Cu/Al2O3 catalysts were tested in different reaction conditions from which it emerged that mono-Rh/Al2O3 was the best performing catalyst, allowing achievement of 100% substrate conversion and 99% selectivity towards Helional® in 24 h at 80 °C, p(H2) 1.0 MPa in the presence of a base. To establish correlations between atomic structure and catalytic activity, catalysts were characterized by Cu, Rh and Pd K-edge XANES, EXAFS analysis. These characterizations allowed verification that the formation of Pd-Cu alloys and the presence of Cu oxide/hydroxide species on the surface of the Al2O3 support are responsible for the very low catalytic efficiency of bimetallic species tested.
Keywords: selective hydrodechlorination, heterogeneous catalysis, XANES analysis, EXAFS analysis
Published in RUNG: 25.04.2024; Views: 1708; Downloads: 9
Full text (446,63 KB)
This document has many files! More... |
6. |
7. AutoSourceID-Classifier : star-galaxy classification using a convolutional neural network with spatial informationF. Stoppa, Saptashwa Bhattacharyya, R. Ruiz de Austri, P. Vreeswijk, S. Caron, Gabrijela Zaharijas, S. Bloemen, G. Principe, D. Malyshev, Veronika Vodeb, 2023, original scientific article Abstract: Aims: Traditional star-galaxy classification techniques often rely on feature estimation from catalogs, a process susceptible to introducing inaccuracies, thereby potentially jeopardizing the classification’s reliability. Certain galaxies, especially those not manifesting as extended sources, can be misclassified when their shape parameters and flux solely drive the inference. We aim to create a robust and accurate classification network for identifying stars and galaxies directly from astronomical images.
Methods: The AutoSourceID-Classifier (ASID-C) algorithm developed for this work uses 32x32 pixel single filter band source cutouts
generated by the previously developed AutoSourceID-Light (ASID-L) code. By leveraging convolutional neural networks (CNN) and
additional information about the source position within the full-field image, ASID-C aims to accurately classify all stars and galaxies within a survey. Subsequently, we employed a modified Platt scaling calibration for the output of the CNN, ensuring that the derived probabilities were effectively calibrated, delivering precise and reliable results.
Results: We show that ASID-C, trained on MeerLICHT telescope images and using the Dark Energy Camera Legacy Survey (DECaLS) morphological classification, is a robust classifier and outperforms similar codes such as SourceExtractor. To facilitate a rigorous comparison, we also trained an eXtreme Gradient Boosting (XGBoost) model on tabular features extracted by SourceExtractor.
While this XGBoost model approaches ASID-C in performance metrics, it does not offer the computational efficiency and reduced
error propagation inherent in ASID-C’s direct image-based classification approach. ASID-C excels in low signal-to-noise ratio and crowded scenarios, potentially aiding in transient host identification and advancing deep-sky astronomy.
Keywords: astronomical databases, data analysis, statistics, image processing
Published in RUNG: 12.12.2023; Views: 1598; Downloads: 6
Full text (10,31 MB)
This document has many files! More... |
8. Max-type reliability in uncertain post-disaster networks through the lens of sensitivity and stability analysisAhmad Hosseini, 2024, original scientific article Abstract: The functionality of infrastructures, particularly in densely populated areas, is greatly impacted by natural disasters, resulting in uncertain networks. Thus, it is important for crisis management professionals and computer-based systems for transportation networks (such as expert systems) to utilize trustworthy data and robust computational methodologies when addressing convoluted decision-making predicaments concerning the design of transportation networks and optimal routes. This study aims to evaluate the vulnerability of paths in post-disaster transportation networks, with the aim of facilitating rescue operations and ensuring the safe delivery of supplies to affected regions. To investigate the problem of links' tolerances in uncertain networks and the resiliency and reliability of paths, an uncertainty theory-based model that employs minmax optimization with a bottleneck objective function is used. The model addresses the uncertain maximum reliable paths problem, which takes into account uncertain risk variables associated with links. Rather than using conventional methods for calculating the deterministic tolerances of a single element in combinatorial optimization, this study introduces a generalization of stability analysis based on tolerances while the perturbations in a group of links are involved. The analysis defines set tolerances that specify the minimum and maximum values that a designated group of links could simultaneously fluctuate while maintaining the optimality of the max-type reliable paths. The study shows that set tolerances can be considered as well-defined and proposes computational methods to calculate or bound such quantities - which were previously unresearched and difficult to measure. The model and methods are demonstrated to be both theoretically and numerically efficient by applying them to four subnetworks from our case study. In conclusion, this study provides a comprehensive approach to addressing uncertainty in reliability problems in networks, with potential applications in various fields.
Keywords: Disaster Management, Network Reliability, Stability Analysis, Transportation, Uncertainty
Published in RUNG: 24.11.2023; Views: 1524; Downloads: 6
Link to file
This document has many files! More... |
9. AutoSourceID-FeatureExtractor : optical image analysis using a two-step mean variance estimation network for feature estimation and uncertainty characterisationF. Stoppa, R. Ruiz de Austri, P. Vreeswijk, Saptashwa Bhattacharyya, S. Caron, S. Bloemen, Gabrijela Zaharijas, G. Principe, Veronika Vodeb, P. J. Groot, E. Cator, G. Nelemans, 2023, original scientific article Abstract: Aims: In astronomy, machine learning has been successful in various tasks such as source localisation, classification, anomaly detection, and segmentation. However, feature regression remains an area with room for improvement. We aim to design a network that can accurately estimate sources' features and their uncertainties from single-band image cutouts, given the approximated locations of the sources provided by the previously developed code AutoSourceID-Light (ASID-L) or other external catalogues. This work serves as a proof of concept, showing the potential of machine learning in estimating astronomical features when trained on meticulously crafted synthetic images and subsequently applied to real astronomical data.
Methods: The algorithm presented here, AutoSourceID-FeatureExtractor (ASID-FE), uses single-band cutouts of 32x32 pixels around the localised sources to estimate flux, sub-pixel centre coordinates, and their uncertainties. ASID-FE employs a two-step mean variance estimation (TS-MVE) approach to first estimate the features and then their uncertainties without the need for additional information, for example the point spread function (PSF). For this proof of concept, we generated a synthetic dataset comprising only point sources directly derived from real images, ensuring a controlled yet authentic testing environment.
Results: We show that ASID-FE, trained on synthetic images derived from the MeerLICHT telescope, can predict more accurate features with respect to similar codes such as SourceExtractor and that the two-step method can estimate well-calibrated uncertainties that are better behaved compared to similar methods that use deep ensembles of simple MVE networks. Finally, we evaluate the model on real images from the MeerLICHT telescope and the Zwicky Transient Facility (ZTF) to test its transfer learning abilities.
Keywords: data analysis, image processing, astronomical databases
Published in RUNG: 08.11.2023; Views: 1472; Downloads: 9
Link to file
This document has many files! More... |
10. Performance of the Cherenkov Telescope Array in the presence of cloudsMario Pecimotika, Saptashwa Bhattacharyya, Barbara MARČUN, Judit Pérez Romero, Samo Stanič, Veronika Vodeb, Serguei Vorobiov, Gabrijela Zaharijas, Marko Zavrtanik, Danilo Zavrtanik, Miha Živec, 2021, published scientific conference contribution Abstract: The Cherenkov Telescope Array (CTA) is the future ground-based observatory for gamma-ray astronomy at very high energies. The atmosphere is an integral part of every Cherenkov telescope. Di˙erent atmospheric conditions, such as clouds, can reduce the fraction of Cherenkov photons produced in air showers that reach ground-based telescopes, which may a˙ect the performance. Decreased sensitivity of the telescopes may lead to misconstructed energies and spectra. This study presents the impact of various atmospheric conditions on CTA performance. The atmospheric transmission in a cloudy atmosphere in the wavelength range from 203 nm to 1000 nm was simulated for di˙erent cloud bases and di˙erent optical depths using the MODerate resolution atmospheric TRANsmission (MODTRAN) code. MODTRAN output files were used as inputs for generic Monte Carlo simulations. The analysis was performed using the MAGIC Analysis and Reconstruction Software (MARS) adapted for CTA. As expected, the e˙ects of clouds are most evident at low energies, near the energy threshold. Even in the presence of dense clouds, high-energy gamma rays may still trigger the telescopes if the first interaction occurs lower in the atmosphere, below the cloud base. A method to analyze very high-energy data obtained in the presence of clouds is presented. The systematic uncertainties of the method are evaluated. These studies help to gain more precise knowledge about the CTA response to cloudy conditions and give insights on how to proceed with data obtained in such conditions. This may prove crucial for alert-based observations and time-critical studies of transient phenomena.
Keywords: Cherenkov Telescope Array, very-high energy gamma rays, MODerate resolution atmospheric TRANsmission code, MAGIC Analysis and Reconstruction Software
Published in RUNG: 18.09.2023; Views: 1429; Downloads: 5
Full text (980,51 KB)
This document has many files! More... |
