1. First utilization of magnetically-assisted photocatalytic iron ▫$oxide-TiO_2$▫ nanocomposites for the degradation of the problematic antibiotic ciprofloxacin in an aqueous environmentJosip Radić, Gregor Žerjav, Lucija Jurko, Perica Bošković, Lidija Fras Zemljič, Alenka Vesel, Andraž Mavrič, Martina Gudelj, Olivija Plohl, 2024, izvirni znanstveni članek Opis: The emergence of antimicrobial resistance due to antibiotics in the environment presents significant public health, economic, and societal risks. This study addresses the need for effective strategies to reduce antibiotic residues, focusing on ciprofloxacin degradation. Magnetic iron oxide nanoparticles (IO NPs), approximately 13 nm in size, were synthesized and functionalized with branched polyethyleneimine (bPEI) to obtain a positive charge. These IO-bPEI NPs were combined with negatively charged titanium dioxide NPs (TiO2@CA) to form magnetically photocatalytic IO-TiO2 nanocomposites. Characterization techniques, including X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), electrokinetic measurements, and a vibrating sample magnetometer (VSM), confirmed the successful formation and properties of the nanocomposites. The nanocomposites exhibited a high specific surface area, reduced mobility of photogenerated charge carriers, and enhanced photocatalytic properties. Testing the photocatalytic potential of IO-TiO2 with ciprofloxacin in water under UV-B light achieved up to 70% degradation in 150 min, with a degradation rate of 0.0063 min−1. The nanocomposite was magnetically removed after photocatalysis and successfully regenerated for reuse. These findings highlight the potential of IO-TiO2 nanocomposites for reducing ciprofloxacin levels in wastewater, helping curb antibiotic resistance.
Ključne besede: photocatalytic degradation, magnetic iron oxide-TiO2 nanocomposites, hetero-agglomeration, multifunctionality, antibiotic ciprofloxacin, antimicrobial resistance
Objavljeno v RUNG: 09.09.2024; Ogledov: 322; Prenosov: 3
 Celotno besedilo (14,48 MB)
Gradivo ima več datotek! Več... |
2. Transparent vanadium doped titania-silica films : structural characterization and self-cleaning propertiesAndraž Šuligoj, Nejc Povirk, Ksenija Maver, Andraž Mavrič, Urška Lavrenčič Štangar, Angelja Kjara Surca, 2024, izvirni znanstveni članek Ključne besede: photocatalysis, TiO2-SiO2, vanadium, film, Raman spectroscopy
Objavljeno v RUNG: 09.09.2024; Ogledov: 309; Prenosov: 4
Celotno besedilo (9,47 MB)
Gradivo ima več datotek! Več... |
3. The role of lattice defects on the optical properties of TiO[sub]2 nanotube arrays for synergistic water splittingManel Machreki, Takwa Chouki, Georgi Tyuliev, Mattia Fanetti, Matjaž Valant, Denis Arčon, Matej Pregelj, Saim Emin, 2023, izvirni znanstveni članek Opis: In this study, we report a facile one-step chemical method to synthesize reduced titanium dioxide (TiO2) nanotube arrays (NTAs) with point defects. Treatment with NaBH4 introduces oxygen vacancies (OVs) in the TiO2 lattice. Chemical analysis and optical studies indicate that the OV density can be significantly increased by changing reduction time treatment, leading to higher optical transmission of the TiO2 NTAs and retarded carrier recombination in the photoelectrochemical process. A cathodoluminescence (CL) study of reduced TiO2 (TiO2–x) NTAs revealed that OVs contribute significantly to the emission bands in the visible range. It was found that the TiO2 NTAs reduced for a longer duration exhibited a higher concentration of OVs. A typical CL spectrum of TiO2 was deconvoluted to four Gaussian components, assigned to F, F+, and Ti3+ centers.
Ključne besede: TiO2 nanotubes, defects, cathodoluminescence
Objavljeno v RUNG: 13.12.2023; Ogledov: 1099; Prenosov: 9
Celotno besedilo (5,75 MB)
Gradivo ima več datotek! Več... |
4. Defective ▫$TiO_2$▫ nanotube arrays for efficient photoelectrochemical degradation of organic pollutantsManel Machreki, Takwa Chouki, Georgi Tyuliev, Dušan Žigon, Bunsho Ohtani, Alexandre Loukanov, Plamen Stefanov, Saim Emin, 2023, izvirni znanstveni članek Opis: Oxygen vacancies (OVs) are one of the most critical factors that enhance the electrical and catalytic characteristics of metal oxide-based photo-electrodes. In this work, a simple procedure was applied to prepare reduced TiO 2 nanotube arrays (NTAs) (TiO 2−x) via a one-step reduction method using NaBH 4. A series of characterization techniques were used to study the structural, optical, and electronic properties of TiO 2−x NTAs. X-ray photoelectron spectroscopy confirmed the presence of defects in TiO 2−x NTAs. Photoacoustic measurements were used to estimate the electron-trap density in the NTAs. Photoelectrochemical studies show that the photocurrent density of TiO 2−x NTAs was nearly 3 times higher than that of pristine TiO 2. It was found that increasing OVs in TiO 2 affects the surface recombination centers, enhances electrical conductivity, and improves charge transport. For the first time, a TiO 2−x photoanode was used in the photo-electrochemical (PEC) degradation of a textile dye (basic blue 41, B41) and ibuprofen (IBF) pharmaceutical using in situ generated reactive chlorine species (RCS). Liquid chromatography coupled with mass spectrometry was used to study the mechanisms for the degradation of B41 and IBF. Phytotoxicity tests of B41 and IBF solutions were performed using Lepidium sativum L. to evaluate the potential acute toxicity before and after the PEC treatment. The present work provides efficient PEC degradation of the B41 dye and IBF in the presence of RCS without generating harmful products.
Ključne besede: TiO2, nanotube arrays, photoelectrochemical degradation, organic pollutants
Objavljeno v RUNG: 12.06.2023; Ogledov: 1691; Prenosov: 12
Celotno besedilo (4,22 MB)
Gradivo ima več datotek! Več... |
5. Reduced TiO2 nanotube arrays for photoelectrochemical degradation of pharmaceuticalManel Machreki, Takwa Chouki, Georgi Tyuliev, Dušan Žigon, Bunsho Ohtani, Alexandre Loukanov, Plamen Stefanov, Saim Emin, 2022, objavljeni povzetek znanstvenega prispevka na konferenci Ključne besede: TiO2, nanotube arrays, photoelectrochemical degradation, pharmaceuticals
Objavljeno v RUNG: 10.02.2023; Ogledov: 1728; Prenosov: 0
Gradivo ima več datotek! Več... |
6. The role of substrate on thermal evolution of Ag/TiO[sub]2 nanogranular thin filmsVincenzo Balzano, Emanuele Cavaliere, Mattia Fanetti, Sandra Gardonio, Luca Gavioli, 2021, izvirni znanstveni članek Ključne besede: nanogranular composite thin film, substrate driven properties, morphology, optical absorption, Ag/TiO2
Objavljeno v RUNG: 03.12.2021; Ogledov: 2846; Prenosov: 144
 Povezava na celotno besedilo
Gradivo ima več datotek! Več... |
7. Characterization of Cu and Zr modified TiO[sub]2 photocatalysts by photothermal beam deflection spectrometryMahmoud Abdelhamid, Dorota Korte, Humberto Cabrera, Zeinab Ebrahimpour, Olena Pliekhova, Urška Lavrenčič Štangar, Mladen Franko, 2021, objavljeni povzetek znanstvenega prispevka na konferenci Ključne besede: photocatalysts, TiO2, Cu/Zr, photodegradation, material characterization, photothermal spectrometry
Objavljeno v RUNG: 23.11.2021; Ogledov: 3072; Prenosov: 0
Gradivo ima več datotek! Več... |
8. Thermo-optical characterization of Cu- and Zr-modified TiO[sub]2 photocatalysts by beam deflection spectrometryMahmoud Abdelhamid, Dorota Korte, Humberto Cabrera, Olena Pliekhova, Zeinab Ebrahimpour, Urška Lavrenčič Štangar, Mladen Franko, 2021, izvirni znanstveni članek Ključne besede: photocatalysts, TiO2, Cu/Zr, photodegradation, material characterization, photothermal spectrometry
Objavljeno v RUNG: 23.11.2021; Ogledov: 2344; Prenosov: 98
Povezava na celotno besedilo
Gradivo ima več datotek! Več... |
9. Chemical (in)stability of interfaces between different metals and Bi[sub]2Se[sub]3 topological insulatorKatja Ferfolja, Mattia Fanetti, Sandra Gardonio, Matjaž Valant, 2018, objavljeni povzetek znanstvenega prispevka na konferenci Opis: In recent years a classification of materials based on their topological order gained popularity due to the discovery of materials with special topological character – topological insulators (TI). TI have different band structure than regular insulators or conductors. They are characterized by a band gap in the bulk of the material, but at the surface they possess conductive topological surface states (TSS) that cross the Fermi level. TSS are a consequence of the non-trivial bulk band structure and have properties that differ from ordinary surface states. They are robust toward contamination and deformation of the surface. Additionally, they are also spin polarized, which means that an electron spin is locked to a crystal momentum and, therefore, backscattering during transport is suppressed [1]. Due to their specific properties the TI could be used in fields of spintronics, quantum computing and catalysis [2].
The investigation of the interfaces between metals and the TI has not been given much attention even though its characterization is interesting from fundamental physics and applicative point of view. (In)stability of the contacts with metal electrodes, in a form of a chemical reaction or diffusion, has to be taken into account since it can affect the transport properties of the material or increase the contact resistance. Our research is dedicated to the study of the metal/TI interfaces, in particular to Bi2Se3 with deposited metals that are relevant for electrical contacts (Au, Ag, Pt, Cr, Ti). The thermal and chemical stability of the interfaces are of fundamental importance for understanding the contact behavior, therefore, we focused our work to the characterization of these properties. The metal/TI interfaces are investigated mainly with an electron microscopy (SEM, TEM, STM), EDX microanalysis and XRD. Our previous studies showed that the interface between Bi2Se3, and Ag deposited either chemically or from a vapor phase, results in the formation of new phases already at room temperature [3]. On the contrary, Au deposited on the Bi2Se3 surface shows very limited reactivity and is stable at RT, but diffusion and coalescence of the metal are observed starting from 100 °C [4]. In this contribution, we will present further characterization on the evolution of the Ag/Bi2Se3 and Au/Bi2Se3 interfaces, show preliminary results about recently investigated systems (Pt/Bi2Se3, Ti/Bi2Se3) and compare the thermal and chemical stability of the systems under investigation.
Ključne besede: thermal lens spectrometry, photothermal beam deflection spectroscopy, dye remediation, photothermal technique, photocatalytic degradation, reactive blue 19, TiO2 modification
Objavljeno v RUNG: 20.08.2021; Ogledov: 2874; Prenosov: 0
Gradivo ima več datotek! Več... |
10. Improved photocatalytic activity of SnO[sub]2-TiO[sub]2 nanocomposite thin films prepared by low-temperature sol-gel methodKsenija Maver, Iztok Arčon, Mattia Fanetti, Samar Al Jitan, Giovanni Palmisano, Matjaž Valant, Urška Lavrenčič Štangar, 2021, izvirni znanstveni članek Opis: The objective of this research was to investigate how the photocatalytic activity of pure TiO2 can be improved by
SnO2 modification. Different molar ratios of tin to titanium were prepared. The correlation between tin concentration
and structural properties was investigated to explain the mechanism of photocatalytic efficiency and
to optimize the synthesis conditions to obtain enhanced activity of the SnO2-modified TiO2 photocatalysts under
UV-irradiation. The SnO2-modified TiO2 photocatalysts were prepared by a low-temperature sol-gel method
based on organic tin and titanium precursors. The precursors underwent sol-gel reactions separately to form
SnO2-TiO2 sol. The sol-gels were deposited on a glass substrate by a dip-coating technique and dried at 150 ◦C to
obtain the photocatalysts in the form of a thin film. To test the thermal stability of the material, an additional set
of photocatalysts was prepared by calcining the dried samples in air at 500 ◦C. The photocatalytic activity of the
samples was determined by measuring the degradation rate of an azo dye. An increase of up to 30% in the
photocatalytic activity of the air-dried samples was obtained when the TiO2 was modified with the SnO2 in a
concentration range of 0.1–1 mol.%. At higher SnO2 loadings, the photocatalytic activity of the photocatalyst
was reduced compared to the unmodified TiO2. The calcined samples showed an overall reduced photocatalytic
activity compared to the air-dried samples. Various characterization techniques (UV-Vis, XRD, N2-physisorption,
TEM, EDX, SEM, XAS and photoelectrochemical characterization) were used to explain the mechanism for the
enhanced and hindered photocatalytic performances of the SnO2-modified TiO2 photocatalysts. The results
showed that the nanocrystalline cassiterite SnO2 is attached to the TiO2 nanocrystallites through the Sn-O-Ti
bonds. In this way, the coupling of two semiconductors, SnO2 and TiO2, was demonstrated. Compared to
single-phase photocatalysts, the coupling of semiconductors has a beneficial effect on the separation of charge
carriers, which prolongs their lifetime for accessibility to participate in the redox reactions. The maximum increase
in activity of the thin films was achieved in the low concentration range (0.1–1 mol.%), which means that
an optimal ratio and contact of the two phases is achieved for the given physical parameters such as particle size,
shape and specific surface area of the catalyst.
Ključne besede: photocatalytic activity, Sn-modified TiO2, low-temperature, thin films, XAS analysis
Objavljeno v RUNG: 05.07.2021; Ogledov: 3393; Prenosov: 0
Gradivo ima več datotek! Več... |
