Repozitorij Univerze v Novi Gorici

Iskanje po repozitoriju
A+ | A- | Pomoč | SLO | ENG

Iskalni niz: išči po
išči po
išči po
išči po
* po starem in bolonjskem študiju

Opcije:
  Ponastavi


1 - 5 / 5
Na začetekNa prejšnjo stran1Na naslednjo stranNa konec
1.
Degradation of microplastics in the environment : dissertation
Vaibhav Budhiraja, 2024, doktorska disertacija

Opis: Plastics are based on organic polymers that are sensitive to the environment in which they find themselves and will gradually decay through a variety of chemical reactions. This process is of great importance for the transformation and persistence of microplastics (MPs) that pollute the environment. The rate of degradation depends on two major factors: Firstly, the intrinsic properties of the polymers, such as chemical structure, molecular weight, crystallinity and the presence of additives, fillers or reinforcement and secondly, the environment to which they are exposed. The degradation rate of plastic will vary in different environmental matrices like soil, freshwater, seawater, wastewater, land etc., as well as in diverse environmental conditions like UV radiation, temperature, humidity, the effect of pollutants etc. Plastic mainly undergoes two fundamental reactions: oxidation and hydrolysis and the chemical structure of the polymer and its additives plays a key role in the degradation mechanism of plastic. Polyolefins having a carbon-only main chain are resistant to hydrolysis but susceptible to oxidation, whereas polyesters and polyamides containing heteroatoms are sensitive to hydrolysis and much more resistant to oxidation. In the context of the present work, five different studies were done involving both naturally degraded plastic and accelerated weathering of plastics in the form of small particles, MPs. In the first study, natural degraded polyethylene (PE) and polypropylene (PP) samples with a life span of more than forty years were collected from the environment and their physiochemical properties were analysed. The results show that red coloured PE samples were more degraded as compared to blue coloured samples, indicating that pigment plays a key role in the degradation. The PP sample shows extreme surface degradation, leading to fragmentation and the generation of MPs. In the second study, the effect of hydrodynamic cavitation on MPs in waste water treatment plant sludge was evaluated. PE, PP, polyethylene terephthalate and polyamide were extracted from the sludge. It was found that hydrodynamic cavitation does not disintegrate the MPs, although it removes some toxic metals and shows cell disruption mechanisms. Other studies were done with accelerated weathered MPs, which include PE, PP and tire wear particles (TWP), that were treated in accordance with an ISO 4892 standard weathering procedure that mimics natural weathered conditions. In the third study, we used weathered PE films to evaluate the synergistic adsorption behaviour of two pollutants, namely triclosan (TCS) and methylparaben (MeP). It was found that weathered MPs adsorb more pollutants and the adsorption behaviour of TCS is enhanced in the presence of MeP. In the fourth study, the magnetic extraction of pristine and weathered PE and TWP particles was performed. The results confirmed that the magnetic VI extraction of weathered MPs is difficult as compared to pristine MPs as their surface becomes more hydrophilic with weathering. In the fifth study, the effect of weathering on the density of PE and PP was evaluated. We found that weathering enhances the density of polyolefins, which is one of the main reasons for the observed sinking of polyolefin MPs in water.
Ključne besede: accelerated weathering, aging, density, magnetic separation, pigment, plastic degradation, pollutants, polyethylene, polyolefin, polypropylene, sinking, tire wear particles, dissertations
Objavljeno v RUNG: 04.06.2024; Ogledov: 1305; Prenosov: 0
.pdf Celotno besedilo (7,35 MB)

2.
Enzyme-immobilized hierarchically porous covalent organic framework biocomposite for catalytic degradation of broad-range emerging pollutants in water
Nada Elmerhi, Khadega Al-Maqdi, Khawlah Athamneh, Abdul Khayum Mohammed, Tina Škorjanc, Felipe Gándara, Jesus Raya, Pascal Simon, Olivier Siri, Ali Trabolsi, 2023, izvirni znanstveni članek

Opis: Efficient enzyme immobilization is crucial for the successful commercialization of large-scale enzymatic water treatment. However, issues such as lack of high enzyme loading coupled with enzyme leaching present challenges for the widespread adoption of immobilized enzyme systems. The present study describes the development and bioremediation application of an enzyme biocomposite employing a cationic macrocycle-based covalent organic framework (COF) with hierarchical porosity for the immobilization of horseradish peroxidase (HRP). The intrinsic hierarchical porous features of the azacalix[4]arene-based COF (ACA-COF) allowed for a maximum HRP loading capacity of 0.76 mg/mg COF with low enzyme leaching (<5.0%). The biocomposite, HRP@ACA-COF, exhibited exceptional thermal stability (~200% higher relative activity than the free enzyme), and maintained ~60% enzyme activity after five cycles. LCMSMS analyses confirmed that the HRP@ACA-COF system was able to achieve >99% degradation of seven diverse types of emerging pollutants (2-mercaptobenzothiazole, paracetamol, caffeic acid, methylparaben, furosemide, sulfamethoxazole, and salicylic acid)in under an hour. The described enzyme-COF system offers promise for efficient wastewater bioremediation applications.
Ključne besede: covalent organic frameworks, enzymes, emerging pollutants, water purification, biocomposite
Objavljeno v RUNG: 11.08.2023; Ogledov: 2105; Prenosov: 11
.pdf Celotno besedilo (1,45 MB)
Gradivo ima več datotek! Več...

3.
Defective ▫$TiO_2$▫ nanotube arrays for efficient photoelectrochemical degradation of organic pollutants
Manel Machreki, Takwa Chouki, Georgi Tyuliev, Dušan Žigon, Bunsho Ohtani, Alexandre Loukanov, Plamen Stefanov, Saim Emin, 2023, izvirni znanstveni članek

Opis: Oxygen vacancies (OVs) are one of the most critical factors that enhance the electrical and catalytic characteristics of metal oxide-based photo-electrodes. In this work, a simple procedure was applied to prepare reduced TiO 2 nanotube arrays (NTAs) (TiO 2−x) via a one-step reduction method using NaBH 4. A series of characterization techniques were used to study the structural, optical, and electronic properties of TiO 2−x NTAs. X-ray photoelectron spectroscopy confirmed the presence of defects in TiO 2−x NTAs. Photoacoustic measurements were used to estimate the electron-trap density in the NTAs. Photoelectrochemical studies show that the photocurrent density of TiO 2−x NTAs was nearly 3 times higher than that of pristine TiO 2. It was found that increasing OVs in TiO 2 affects the surface recombination centers, enhances electrical conductivity, and improves charge transport. For the first time, a TiO 2−x photoanode was used in the photo-electrochemical (PEC) degradation of a textile dye (basic blue 41, B41) and ibuprofen (IBF) pharmaceutical using in situ generated reactive chlorine species (RCS). Liquid chromatography coupled with mass spectrometry was used to study the mechanisms for the degradation of B41 and IBF. Phytotoxicity tests of B41 and IBF solutions were performed using Lepidium sativum L. to evaluate the potential acute toxicity before and after the PEC treatment. The present work provides efficient PEC degradation of the B41 dye and IBF in the presence of RCS without generating harmful products.
Ključne besede: TiO2, nanotube arrays, photoelectrochemical degradation, organic pollutants
Objavljeno v RUNG: 12.06.2023; Ogledov: 1903; Prenosov: 12
.pdf Celotno besedilo (4,22 MB)
Gradivo ima več datotek! Več...

4.
Effects of Different Copper Loadings on the Photocatalytic Activity of TiO2-SiO2 Prepared at a Low Temperature for the Oxidation of Organic Pollutants in Water
T. Čižmar, Iztok Arčon, Mattia Fanetti, Urška Lavrenčič Štangar, 2018, izvirni znanstveni članek

Opis: The objective of this research is to examine how Cu modification can improve the photocatalytic activity of TiO2-SiO2, to explainthe correlation between the Cu concentration and the chemical state of Cu cations in the TiO2-SiO2 matrix, and the photocatalytic activity under UV/solar irradiation. The Cu-modified TiO2-SiO2 photocatalysts were prepared by a low-temperature sol–gel method from organic Cu, Si and Ti precursors with various Cu concentrations (0.05–3 mol %). The sol–gels were dried at 150 8C to obtain the photocatalysts in a powder form. The photocatalytic activity was determined by using a fluorescence- based method of terephthalic acid decomposition. An up to three times increase in photocatalytic activity is obtained if the TiO2-SiO2 matrix is modified with Cu in a narrow concentration range from 0.05 to 0.1 mol%. At higher Cu loadings, the photocatalytic activity of the Cu-modified photocatalysts is lower than that of the un-modified reference TiO2-SiO2 photocatalyst. XRD was used to show that all Cu-modified TiO2-SiO2 composites with different Cu concentrations have the same crystalline structure as un-modified TiO2-SiO2 composites. The addition of Cu does not change the relative ratio between the anatase and brookite phases or unit cell parameters of the two TiO2 crystalline structures. We used Cu K-edge X-ray absorption near edge structure and extended X-ray absorption fine structure analyses to determine the valence state and local structure of Cu cations in the Cu-modified TiO2-SiO2 photocatalysts. The results elucidate the mechanism responsible for the improved photocatalytic activity. In samples with a low Cu content, which exhibit the highest activity, Cu@O@Ti connections are formed, which suggests that the activity enhancement is caused by the attachment of CuII cations on the surface of the photocatalytically active TiO2 nanoparticles, so CuII cations may act as free-electron traps, which reduce the intensity of recombination between electrons and holes at the TiO2 photocatalyst surface. At higher Cu loadings no additional Cu@O@Ti connections are formed, instead only Cu@O@Cu connections are established. This indicates the formation of amorphous or nanocrystalline copper oxide, which hinders the photocatalytic activity of TiO2.
Ključne besede: Cu modified TiO2-SiO2 photocatalyst Cu EXAFS, XANES, Organic pollutants
Objavljeno v RUNG: 30.08.2018; Ogledov: 4563; Prenosov: 0
Gradivo ima več datotek! Več...

5.
Extraction of Organochlorine Pesticides from Plastic Pellets and Plastic Type Analysis
Maryline Pflieger, Petra Makorič, Manca Kovač Viršek, Špela Koren, 2017, pregledni znanstveni članek

Opis: Plastic resin pellets, categorized as microplastics (≤5 mm in diameter), are small granules that can be unintentionally released to the environment during manufacturing and transport. Because of their environmental persistence, they are widely distributed in the oceans and on beaches all over the world. They can act as a vector of potentially toxic organic compounds (e.g., polychlorinated biphenyls) and might consequently negatively affect marine organisms. Their possible impacts along the food chain are not yet well understood. In order to assess the hazards associated with the occurrence of plastic pellets in the marine environment, it is necessary to develop methodologies that allow for rapid determination of associated organic contaminant levels. The present protocol describes the different steps required for sampling resin pellets, analyzing adsorbed organochlorine pesticides (OCPs) and identifying the plastic type. The focus is on the extraction of OCPs from plastic pellets by means of a pressurized fluid extractor (PFE) and on the polymer chemical analysis applying Fourier Transform-InfraRed (FT-IR) spectroscopy. The developed methodology focuses on 11 OCPs and related compounds, including dichlorodiphenyltrichloroethane (DDT) and its two main metabolites, lindane and two production isomers, as well as the two biologically active isomers of technical endosulfan. This protocol constitutes a simple and rapid alternative to existing methodology for evaluating the concentration of organic contaminants adsorbed on plastic pieces.
Ključne besede: Environmental Sciences, Issue 125, Microplastics, resin pellets, pesticides, persistent organic pollutants, organochlorine pesticides, dichlorodiphenyltrichloroethane, endosulfan, hexachlorocyclohexane, lindane, Fourier transform infrared spectroscopy, pressurized fluid extractor
Objavljeno v RUNG: 10.07.2017; Ogledov: 5475; Prenosov: 0

Iskanje izvedeno v 0.02 sek.
Na vrh