Search the repository

A+ | A- | | SLO | ENG

Abstract: Discriminating the absorption coefficients of aerosol mineral dust and black carbon (BC) in different aerosol size fractions is a challenge because of BC's large mass absorption cross-section compared to dust. Ambient aerosol wavelength dependent absorption coefficients in supermicron and submicron size fractions were determined with a high time resolution. The measurements were performed simultaneously using identical systems at an urban and a regional background site in Qatar. At each site, measurements were taken by co-located Aethalometers, one with a virtual impactor (VI) and the other with a PM1 cyclone to respectively collect super-micron-enhanced and submicron fractions. The combined measurement of aerosol absorption and scattering coefficients enabled the particles to be classified based on their optical properties' wavelength dependence. The classification reveals the presence of BC internally/externally mixed with different aerosols. Helium ion microscopy images provided information concerning the extent of mineral dust in the submicron fraction. The determination of absorption coefficients during dust storms and non-dust periods was used to establish the absorption Ångström exponent for dust and BC. Non-parametric wind regression, potential source contribution function and back-trajectory analysis reveal major regional sources of desert dust associated with north-westerly winds and a minor local dust contribution. In contrast, major BC sources found locally were associated with south-westerly winds with a smaller contribution made by offshore emissions transported by north-easterly and easterly winds. The use of a pair of Aethalometers with VI and PM1 inlets separates contributions of BC and dust to the aerosol absorption coefficient.
Keywords: aerosol absorption, black carbon, mineral dust, desert dust, Arabian Peninsula
Published in RUNG: 29.02.2024; Views: 315; Downloads: 3
Full text (3,52 MB)
This document has many files! More...

Abstract: Abstract. Recent years have seen an increase in the use of wood for energy production of over 30 %, and this trend is expected to continue due to the current energy crisis and geopolitical instability. At present, residential wood burning (RWB) is one of the most important sources of organic aerosols (OA) and black carbon (BC). While BC is recognized for its large light absorption cross-section, the role of OA in light absorption is still under evaluation due to their heterogeneous composition and source-dependent optical properties. Studies that characterize wood-burning aerosol emissions in Europe typically focus on urban and background sites and only cover BC properties. However, RWB is more prevalent in rural areas, and the present scenario indicates that an improved understanding of the RWB aerosol optical properties and their subsequent connection to climate impacts is necessary for rural areas. We have characterized atmospheric aerosol particles from a central European rural site during wintertime in the village of Retje in Loški Potok, Slovenia, from 01.12.2017 to 07.03.2018. The village experienced extremely high aerosol concentrations produced by RWB and near-ground temperature inversion. The isolated location of the site and the substantial local emissions made it an ideal laboratory-like place for characterizing RWB aerosols with low influence from non-RWB sources under ambient conditions. The mean mass concentrations of OA and BC were 34.8 µg m-3 (max = 271.8 µg m-3) and 3.1 µg m-3 (max = 24.3 µg m-3), respectively. The mean total particle number concentration (10–600 nm) was 9.9 x 103 particles cm-3 (max = 53.5 x 103 particles cm-3). The mean total light absorption coefficient at 370 nm and 880 nm measured by an Aethalometer AE33 were 122.8 Mm-1 and 15.3 Mm-1 and had maximum values of 1103.9 Mm-1 and 179.1 Mm-1, respectively. The aerosol concentrations and absorption coefficients measured during the campaign in Loški Potok were significantly larger than those reported values for several urban areas in the region with larger populations and extent of aerosol sources. Here, considerable contributions from brown carbon (BrC) to the total light absorption were identified, reaching up to 60 % and 48 % in the near UV (370 nm) and blue (470 nm) wavelengths. These contributions are up to three times higher than values reported for other sites impacted by wood-burning emissions. The calculated mass absorption cross-section and the absorption Ångström exponent for RWB OA were MACOA, 370 nm= 2.4 m2 g-1, and AAEBrC, 370–590 nm= 3.9, respectively. Simple forcing efficiency (SFE) calculations were performed as a sensitivity analysis to evaluate the climate impact of the RWB aerosols produced at the study site by integrating the optical properties measured during the campaign. The SFE results show a considerable forcing capacity from the local RWB aerosols, with a high sensitivity to OA absorption properties and a more substantial impact over bright surfaces like snow, typical during the coldest season with higher OA emissions from RWB. Our study's results are highly significant regarding air pollution, optical properties, and climate impact. The findings suggest that there may be an underestimation of RWB emissions in rural Europe and that further investigation is necessary.
Keywords: wood-burning aerosols, optical characterization, black carbon, rural areas
Published in RUNG: 10.01.2024; Views: 481; Downloads: 6
Full text (1,99 MB)
This document has many files! More...

Abstract: During June 2022, the Cyprus Institute (CyI) took part in the ASKOS experiment in Mindelo, Cape Verde, with several of Unmanned Aerial Vehicles (UAVs), fitted with a number of in-situ aerosol instruments able to profile the Saharan Air Layer between the surface and an altitude of 5,300 m. In addition to ASKOS objectives, transnational access project Diurnal vAriation of the vertically resolved siZe distribution in the Saharan Air Layer  (DAZSAL) was also carried out at the same time. The campaign aimed at validating the Aeolus L2A product in the presence of dust and marine aerosols, estimating the influence on Aeolus products of non-spherical particles, evaluating the impact of particle orientation, and study the diurnal cycle of the dust size-distribution at high altitude. In this presentation we will present and discuss the scientific objectives, the context, the Unmanned Aerial Systems (UASs) that we developed in-house, and the instruments used, together with their limitations, calibration methods, uncertainties, challenges and difficulties encountered. We will also discuss the logistical and planning challenges that such a campaign entails.Operations took place from the Cesaria Evora International Airport. The instruments deployed on-board the UAVs permitted to evaluate the height-resolved particle size-distribution between 0.1 and 40 µm and detect cases of particle orientation, to complement the observations with ground-based remote sensing set out by NOA and TROPOS. Moreover, 24 high-altitude dust samples were collected on impactors, for further analysis by Scanning Electron Microscopy. In total, 25 scientific flights were performed on 12 flying days (almost half of which at night). Five flights were conducted during Aeolus overpasses. Weather has been a determining factor for both the ground-based remote sensing operations and the UAS operation, and airport traffic has been another constraint that needed to be accounted for, in the UAS operation.
Keywords: UAV, mineral dust, climate change, Aeolus satellite
Published in RUNG: 21.12.2023; Views: 556; Downloads: 3
Full text (291,05 KB)
This document has many files! More...

Abstract: ESA’s Aeolus satellite observations are expected to have the biggest impact for the improvement of numerical weather prediction in the Tropics. An important case relating to the predictability of tropical weather systems is the outflow of Saharan dust, its interaction with cloud microphysics and impact on the development of tropical storms over the Atlantic Ocean.The Joint Aeolus Tropical Atlantic Campaign (JATAC) deployed on Cabo Verde (2021/2022) and the US Virgin Islands (2021) supported the validation and preparation of the ESA missions Aeolus, EarthCARE and WIVERN, and addressed science objectives regarding the Saharan Aerosol layer, African Easterly Waves and Jet, Tropical Easterly Jet, and the Intertropical Convergence Zone, as well as their relation to the formation of convective systems, and the long-range transport of dust and its impact on air quality.JATAC started in July 2021 with the deployment of ground-based instruments in the frame of the ASKOS project at the Ocean Science Center Mindelo, including the eVe and PollyXT lidars, and a W-band Doppler cloud radar. By mid-August, the CPEX-AW campaign started operations from the US Virgin Islands with NASA’s DC-8 flying laboratory in the Western Tropical Atlantic and Caribbean carrying the Doppler Aerosol Wind Lidar (DAWN), Airborne Precipitation and Cloud Radar (APR-3), Water Vapor DIAL and HSRL (HALO), microwave sounder (HAMSR) and dropsondes. In September the DLR Falcon-20 aircraft, carrying the ALADIN Airborne Demonstrator (A2D) and the 2-µm Doppler wind lidar, and the Safire Falcon-20, carrying the high-spectral-resolution Doppler lidar (LNG), the RASTA Doppler cloud radar, in-situ cloud and aerosol instruments, and dropsondes, were deployed to Sal in the frame of the AVATAR-T and CADDIWA projects. The Aerovizija Advantic WT-10 light aircraft with optical particle spectrometers, filter-photometers and nephelometers for in-situ aerosol characterisation was operating in close coordination with the ground-based observations in the CAVA-AW project.The activities continued in June 2022 when the ASKOS ground based observations were enhanced with UAV airborne in-situ aerosol measurements deployed by the Cyprus Institute, solar radiation measurements supported by PMOD/WRC, dust particle orientation measurements (WALL-E lidar), and radiosonde releases equipped with electric field-mills. NASA deployed the DC-8 aircraft all September to Sal with the 2021 payload in the framework of the CPEX-CV activity, including regular radiosonde launches. As in 2021, the Aerovizija aircraft took part with in-situ aerosol measurements during two weeks in September. JATAC was supported by dedicated numerical weather and dust simulations supporting forecasting efforts and addressing open science questions.Around 60 scientific flights of four aircraft, with an additional 25 UAV flights, were performed during JATAC. 23 Aeolus orbits were underflown, many of them with simultaneous observations of multiple aircraft collocated with ground-based observations. In addition, the science objectives were fully covered through the large number of flights, ground based cloud and aerosol observations, regular radiosondes and dropsondes.Overall, JATAC activities have resulted in a high-quality and comprehensive dataset supporting a wide range of tropical atmospheric research, the validation of Aeolus and other satellites, and have provided key reference data for the development future Earth Observation missions.
Keywords: Aeolus satellite, airborne measurements, mineral dust, cal/val, calibration, validation
Published in RUNG: 21.12.2023; Views: 549; Downloads: 4
Full text (293,23 KB)
This document has many files! More...

Abstract: The complex refractive index (CRI) is one of the key parameter driving aerosol spectral optical properties and direct radiative effects (DRE). Its value and spectral variation under different conditions, such as anthropogenic− and biogenic−dominated environments and anthropogenic−biogenic mixing situations, remains not fully understood. As a consequence, oversimplified representations of aerosol optical properties are generally used in climate models. Therefore, measurements of aerosol CRI in different environments and their inclusion in models are needed. The field observations from the ACROSS campaign, performed in June-July 2022 in the Ile de France region, are used in this study to deepen the knowledge of aerosol optical properties, aiming to improve the aerosol representation in the CHIMERE model and provide the best constraint for DRE simulations. Measurements obtained both at the Paris city center and the Rambouilllet rural forest sites during ACROSS are considered, in order to explore the CRI variability from anthropogenic−dominated to biogenic−dominated environments, including anthropogenic−biogenic mixing situations. The CRI retrievals at seven different wavelengths, performed by combining the Mie theory with optical and size distribution measurements, are representative of different atmospheric conditions, aerosol loadings as well as type and chemical compositions. In fact, the June-July 2022 period was characterized by highly diversified weather conditions: 1) two strong heatwaves, promoting SOA build-up and favoring the export of the Paris pollution plume towards the forest site; 2) Saharan dust events transported from the upper atmosphere to the ground; 3) biomass burning episode; 4) periods with reduced anthropogenic influence. The CRI retrievals under these different conditions and their link to particulate chemical composition is investigated. Hence, the CRI dataset presented here constitutes a unique dataset from which models can benefit to validate and constrain simulations and DRE estimations, under both urban and biogenic emissions influence. These data, in conjunction with those from the aircraft observations during ACROSS, are used to initialize and perform sensitivity studies on the aerosol DRE, using the CHIMERE−WRF coupled model, the OPTSIM model for the aerosol optical properties and the Rapid Radiative Transfer Model for GCMs (RRTMG).Keywords: Complex refractive index, direct radiative effect, aerosol mixing, urban, forest
Keywords: aerosol optical properties, refractive index
Published in RUNG: 21.12.2023; Views: 541; Downloads: 2
Full text (293,28 KB)