Repozitorij Univerze v Novi Gorici

Izpis gradiva
A+ | A- | Pomoč | SLO | ENG

Naslov:XAS studies of Sn modified TiO2 coatings
Avtorji:ID Maver, Ksenija, UNG (Avtor)
ID Arčon, Iztok, UNG (Avtor)
ID Lavrenčič Štangar, Urška, UNG (Avtor)
Datoteke: Gradivo nima datotek, ki so prostodostopne za javnost. Gradivo je morda fizično dosegljivo v knjižnici fakultete, zalogo lahko preverite v COBISS-u. Povezava se odpre v novem oknu
Jezik:Angleški jezik
Vrsta gradiva:Delo ni kategorizirano
Tipologija:1.12 - Objavljeni povzetek znanstvenega prispevka na konferenci
Organizacija:UNG - Univerza v Novi Gorici
Opis:Coatings based on TiO2 are extensively investigated material for the preparation of surfaces which are referred as self-cleaning. Under solar illumination these coatings catalyze pollutants degradation and enhance their removal from the surface due to photoinduced superhydrophilicity [1]. There are two main drawbacks of using pure TiO2 (anatase) as a photocatalyst; i) its band gap lies in the UVA region so it can exploit only a part of the sunlight spectrum, and ii) it has a high degree of recombination between photo generated electrons and holes on the surface. There are various strategies to improve the photocatalytic efficiency of TiO2, one of them is the modification with transition metals. Based on our previous experiences with sol-gel synthesis of low-temperature TiO2 thin films [2], we prepared a series of Sn modified TiO2 photocatalysts. As a starting material only organic (Ti and Sn alkoxide) precursors were used. The loadings of Sn cations were varied in the range of 0.05 to 20 mol.%. The coatings, deposited on glass substrates by dip-coating technique, were dried at 150 oC. In addition, another set of photocatalyst coatings was prepared by further calcination at 500 °C in air. The comparison of photocatalytic activities of Sn modified TiO2 to unmodified TiO2 showed that Sn loadings in the range of 1-10 mol.% improved photocatalytic activity up to 8 times. At lower loadings of Sn, the photocatalytic activity was improved only by 30 %. After the coatings are calcined, their photocatalytic activity was significantly reduced. The objective of the research was to examine the mechanism responsible for photocatalytic properties of Sn modified TiO2 and to to clarify the role of Sn cations in the TiO2 photocatalytic process. For this purpose, Sn and Ti K-edge XANES and EXAFS analysis was used to precisely determine the local structure and the site of incorporation of Sn cations on titania nanoparticles in the coatings. We examined the hypothesis that the solid-solid interface was a crucial structural feature that facilitates charge separation and enhances photocatalytic efficiency of titania.
Ključne besede:Sn, EXAFS, TiO2 fotokatalizator
Leto izida:2018
Št. strani:1
PID:20.500.12556/RUNG-4075-66acf018-12d8-ffc9-53ed-c0114f9ff000 Novo okno
COBISS.SI-ID:5220347 Novo okno
NUK URN:URN:SI:UNG:REP:2PVTK2I9
Datum objave v RUNG:12.09.2018
Število ogledov:4719
Število prenosov:0
Metapodatki:XML DC-XML DC-RDF
:
MAVER, Ksenija, ARČON, Iztok in LAVRENČIČ ŠTANGAR, Urška, 2018, XAS studies of Sn modified TiO2 coatings. V : Book of abstracts, European Conference on X-Ray Spectrometry - EXRS-2018 [na spletu]. Objavljeni povzetek znanstvenega prispevka na konferenci. Ljubljana. 2018. [Dostopano 12 april 2025]. Pridobljeno s: https://repozitorij.ung.si/IzpisGradiva.php?lang=slv&id=4075
Kopiraj citat
  
Skupna ocena:
0.5
1
1.5
2
2.5
3
3.5
4
4.5
5
(0 glasov)
Vaša ocena:Ocenjevanje je dovoljeno samo prijavljenim uporabnikom.
Objavi na:Bookmark and Share



Podobna dela iz ostalih repozitorijev:

Ni podobnih del

Postavite miškin kazalec na naslov za izpis povzetka. Klik na naslov izpiše podrobnosti ali sproži prenos.

Gradivo je del monografije

Naslov:Book of abstracts, European Conference on X-Ray Spectrometry - EXRS-2018
Uredniki:Matjaž Kavčič
Kraj izida:Ljubljana
Leto izida:2018
ISBN:978-961-264-126-9
Prireditelj konference:Inštitut Jožef Stefan

Nazaj