21. Study of water adsorption on EDTA dealuminated zeolite YO. L. Pliekhov, Olena Pliekhova, Iztok Arčon, Federica Bondino, Elena Magnano, Gregor Mali, Nataša Zabukovec Logar, 2020, original scientific article Abstract: Zeolite Y was synthesized and modified with EDTA dealumination procedure. The modified zeolites were
analyzed by X-ray diffraction, X-ray absorption spectroscopy, chemical analysis and water adsorption measurements.
We demonstrated that dealumination with bulk organic acid such as EDTA is able to reduce the
original intense water affinity. Furthermore, it was found that dealumination with EDTA, in contrast with
steaming and HCl dealumination, provides fully controllable, predictable and secure process of Al removal from
the zeolites’ frameworks. The shift of the adsorption isotherm in the low partial pressure range represents an
interesting result for adsorption-based applications. Keywords: Zeolite Y
Water sorption
Dealumination
Al XANES
EDTA treatment Published in RUNG: 05.06.2020; Views: 3034; Downloads: 0 This document has many files! More... |
22. Effects of a Mixed O/F Ligand in the Tavorite-Type LiVPO4O StructureSorour Semsari Parapari, Jean-Marcel Ateba Mba, Elena Tchernychova, Gregor Mali, Iztok Arčon, Gregor Kapun, Mehmet Ali Gülgün, Robert Dominko, 2020, original scientific article Abstract: We report the synthesis and detailed structural
and chemical characterization including electrochemical
properties of a lithium vanadium oxy/fluoro-phosphate
material. To the best of our knowledge, we have for the first
time synthesized a LiVPO4O-type phase with a mixed O/F
ligand. In the synthesis procedure, the LiVPO4O precursor
compound was fluorinated via LiF incorporation, with
preservation of the LiVPO4O framework structure. The
operating potential of the synthesized material is increased
compared to that of the LiVPO4O precursor (4.12 V vs 3.95 V
versus metallic lithium, respectively). The related increase in
operating potential was assigned to the effect of the
intermixing O/F ligand, which is attained via the successful
fluorine incorporation into the LiVPO4O structure. A characterization of the investigated materials was performed using
microscale-covering XRD, XANES, and NMR techniques as well as nanoscale spatially resolved imaging and analytical STEM
techniques. The obtained oxy/fluoro-phosphate phase is isostructural to LiVPO4O; however, the presence of the mixed O/F
ligand promoted a higher symmetry of vanadium octahedra. These variations of the vanadium local environment along with the
observed inhomogeneous distribution of the incorporated fluorine gave rise to the minor local deviations in vanadium valence.
Our results clearly emphasize the connection among the fluorine ligand incorporation, its local distribution, and the
electrochemical properties of the material. Keywords: LiVPO4O, XRD, SEM, V XANES, Tavorite-Type, electrochemical properties Published in RUNG: 17.02.2020; Views: 2951; Downloads: 0 This document has many files! More... |
23. Arabidopsis halleri shows hyperbioindicator behaviour for Pb and leaf Pb accumulation spatially separated from ZnStephan Höreth, Paula Pongrac, Marta Debeljak, Katarina Vogel-Mikuš, Matic Pečovnik, Primož Vavpetič, Iztok Arčon, original scientific article Abstract: Lead (Pb) ranks among the most problematic environmental pollutants. Background contamination of soils is nearly ubiquitous, yet plant Pb accumulation is barely understood. In a survey covering 165 European populations of the metallophyte Arabidopsis halleri, several field samples had indicated Pb hyperaccumulation, offering a chance to dissect plant Pb accumulation.
Accumulation of Pb was analysed in A. halleri individuals from contrasting habitats under controlled conditions to rule out aerial deposition as a source of apparent Pb accumulation. Several elemental imaging techniques were employed to study the spatial distribution and ligand environment of Pb.
Regardless of genetic background, A. halleri individuals showed higher shoot Pb accumulation than A. thaliana. However, dose–response curves revealed indicator rather than hyperaccumulator behaviour. Xylem sap data and elemental imaging unequivocally demonstrated the in planta mobility of Pb. Highest Pb concentrations were found in epidermal and vascular tissues. Distribution of Pb was distinct from that of the hyperaccumulated metal zinc. Most Pb was bound by oxygen ligands in bidentate coordination.
A. halleri accumulates Pb whenever soil conditions render Pb phytoavailable. Considerable Pb accumulation under such circumstances, even in leaves of A. thaliana, strongly suggests that Pb can enter food webs and may pose a food safety risk. Keywords: Pb accumulation, XANES, EXAFS, Arabidopsis halleri Published in RUNG: 16.01.2020; Views: 3087; Downloads: 0 This document has many files! More... |
24. Comparing magnetism in isostructural oxides A[sub](0.8)La[sub](1.2)MnO[sub](4.1) : anisotropic spin glass (A = Ba) versus long range order (A = Sr)Mirela Dragomir, Paul A. Dube, Iztok Arčon, Chad Boyer, Meghan Rutherford, Christopher Wiebe, Graham King, Hanna Dabkowska, John E. Greedan, 2019, original scientific article Abstract: This study presents the strikingly distinct magnetic properties of two isostructural compounds, Ba0.8La1.2MnO4.1
and Sr0.8La1.2MnO4.1 (K2NiF4
type, I4/mmm). Spectroscopic studies have shown that Mn is in a +3.0(1) oxidation state only,
in both compounds; therefore, the charge is balanced by accommodating extra oxygen at interstitial sites, as confirmed by
neutron powder diffraction. We found that the Ba compound exhibits an exceedingly rare anisotropic spin glass behavior, Tg =
26.4(4) K, with the moment freezing along the c-axis only while the in-plane spin components remain dynamic well below Tg.
Experimental results including neutron diffraction, heat capacity, and magnetic (dc and ac) measurements performed on an
oriented single crystal support this conclusion. This is a remarkable result, the only other known example of an anisotropic spin
glass being Fe2TiO5. The spin glass state in Ba0.8La1.2MnO4.1 is argued to arise due to competing antiferromagnetic and
ferromagnetic 180° Mn3+−O−Mn3+ superexchange interactions. In contrast, the Sr analogue shows 2D antiferromagnetic
correlations and long-range antiferromagnetic order below 95(1) K with a remarkably reduced ordered moment of 1.449(49)
μB/Mn3+ instead of the ∼4 μB expected for an S = 2 ion. Keywords: antiferomagnetiki, Mn XANES, struktura Published in RUNG: 23.10.2019; Views: 3126; Downloads: 0 This document has many files! More... |
25. Recent advances in 2D imaging of element distribution in Plants by focused beam techniquesKatarina Vogel-Mikuš, Johannes Teun van Elteren, Marjana Regvar, Jitrin Chaiprapa, Boštjan Jenčič, Iztok Arčon, Alojz Kodre, Peter Kump, Anja Kavčič, Mitja Kelemen, Dino Metarapi, Marijan Nečemer, Primož Vavpetič, Primož Pelicon, Paula Pongrac, 2019, independent scientific component part or a chapter in a monograph Keywords: 2D Imiging, XRF, XANES, synchrotron light Published in RUNG: 05.09.2019; Views: 3263; Downloads: 0 This document has many files! More... |
26. New Insights into Manganese Local Environment in MnS-1NanocrystalsAlenka Ristić, Matjaž Mazaj, Iztok Arčon, Nina Daneu, Nataša Zabukovec Logar, Roger Glaser, Nataša Novak Tušar, 2019, original scientific article Abstract: Manganese plays an important role in redox catalysis using zeolites as inorganic support materials, but the formation of the preferred redox manganese species (framework or extraframework) is still not well understood. Herein, the influence of the amount of manganese together with conventional and microwave-assisted hydrothermal synthesis paths on the formation of manganese species within the zeolite silicalite-1 (S-1) with MFI structure was investigated. It was found out that both synthesis procedures led to the formation of framework and extraframework manganese species, but in different molar ratios. However, the conventional synthesis procedure with all Mn/Si molar ratios generates more framework Mn in comparison to the microwave procedure. Additionally, the diminution of the zeolite crystals to nanoscale from 100 to 200 nm was achieved via the conventional procedure for the first time. UV–vis, Raman, and X-ray absorption spectroscopic analyses revealed different local environments of manganese: Mn3+ incorporated into the silicalite-1 framework as “framework manganese” and Mn2+/3+ present as “extraframework manganese” (Mn2O3, Mn3O4). TEM reveals the presence of Mn3O4 nanorods. Both framework manganese and extraframework manganese exhibit good catalytic activity for styrene epoxidation. Catalytic results suggest that, in oxidation reactions of hydrocarbons, framework manganese is more active at lower Mn contents (Mn/Si < 0.015), whereas extraframework manganese is more active at higher loadings (Mn/Si > 0.015). Keywords: MnS-1 Nanocrystals, Mn XANES, EXAFS, zeolites, microwave-assisted hydrothermal synthesis Published in RUNG: 06.05.2019; Views: 3430; Downloads: 0 This document has many files! More... |
27. Alternative Recovery and Valorization of Metals from Exhausted Catalytic Converters in a New Smart Polymetallic CatalystSebastiano Tieuli, Franco Baldi, Iztok Arčon, Katarina Vogel-Mikuš, Michele Gallo, Laura Sperni, Oreste Piccolo, Stefano Paganelli, 2019, original scientific article Abstract: A new metals-polymeric composite, Metx-EPS (I), was prepared
to be used as catalyst in water or in two-phase aqueous
conditions. The metals source was an exhausted catalytic
converter that was grinded and treated with an acidic solution at room temperature. After filtration, the solution was concentrated, neutralized and added to a broth of Klebsiella oxytoca DSM 29614 to produce (I) where metals are embedded in a peculiar polysaccharide structure (EPS). The composite was easily recovered from the fermentation broth and purified. The process protocol was verified many times and was shown to be reproducible satisfactorily. The % recovery of metals, originally present in the converter, was good as determined by atomic
absorption. The morphology and the chemical state of main
metals in (I) were investigated by X-ray absorption spectroscopy
methods (XANES and EXAFS). No metallic alloy seems to
be evident. The catalytic activity and a possible synergic effect due to the presence of the different metals was valuated in the hydrogenation of some substrates, valuable precursors for theproduction of fine chemicals. Keywords: Biogenerated polymetallic exopolysaccharide, biphasic catalysis, hydrogenation, metals-polymeric
composite, new catalyst from metallic wastes, EXAFS, XANES Published in RUNG: 06.05.2019; Views: 3257; Downloads: 0 This document has many files! More... |
28. Unraveling the arrangement of Al and Fe within the framework explains the magnetism of mixed-metal MIL-100(Al,Fe)Gregor Mali, Matjaž Mazaj, Iztok Arčon, Darko Hanžel, Denis Arčon, Zvonko Jagličić, 2019, original scientific article Abstract: Properties of mixed-metal MOFs depend on the distribution of different
metals within their frameworks. Determination of this distribution is often very
challenging. Using an example of aluminum- and iron-containing MIL-100, we
demonstrate that 27Al NMR spectroscopy, when combined with first-principles
calculations and magnetic, X-band electron paramagnetic resonance, Fe K-edge extended
X-ray absorption fine structure, and Mössbauer measurements, enables one to accurately
determine the arrangement of Al and Fe within the metal trimers, which are the basic
building units of MIL-100. In this particular material, the incorporation of Fe and Al on
the framework metal sites is random. Crucial for deciphering the arrangement is detecting
NMR signals, shifted because of the strong hyperfine interaction between the 27Al nuclei
and the unpaired electronic spins of Fe3+ ions, assigning the shifted signals aided by first-principles calculations of hyperfine
couplings, and quantitatively evaluating the NMR intensities and the measured effective magnetic moment. Keywords: Fe EXAFS, XANES, MIL100, MOF, magnetizem Published in RUNG: 26.03.2019; Views: 3267; Downloads: 0 This document has many files! More... |
29. Correlations between photocatalytic activity and chemical structure of Cu-modified TiO2-SiO2 nanoparticle compositesT. Čižmar, doctoral dissertation Abstract: The objective of this dissertation was to examine how copper modification can improve the photocatalytic activity of TiO2-SiO2 and to explain the correlation between Cu concentration and chemical state of Cu cations in the TiO2-SiO2 matrix, as well as the photocatalytic activity under the UV/solar irradiation.
The Cu-modified TiO2-SiO2 photocatalysts were prepared by a low temperature sol-gel method based on organic copper, silicon and titanium precursors with varied Cu concentrations (from 0.05 to 3 mol%). The sol-gels were dried at 150 °C to obtain the photocatalysts in the powder form. To test thermal stability, additional set of photocatalysts was obtained by calcinating dried samples in air at 500 °C for 1 h.
The photocatalytic activity was determined by a fluorescence-based method of terephthalic acid decomposition. Up to three times increase in photocatalytic activity of air-dried samples is obtained when TiO2-SiO2 matrix is modified with Cu in a narrow concentration range from 0.05 to 0.1 mol%. At higher Cu loadings the photocatalytic activity of Cu-modified photocatalyst is smaller than in the unmodified reference TiO2-SiO2 photocatalyst. Calcined samples showed significantly reduced photocatalytic activity compared to air-dried samples.
XRD analysis showed that all Cu-modified TiO2-SiO2 nanocomposites with different Cu concentrations have the same crystalline structure as unmodified TiO2-SiO2 nanocomposites (air-dried or calcined). The addition of Cu does not change the relative ratio between the anatase and brookite phase or unit cell parameters of the two TiO2 crystalline structures. TEM analysis showed that the addition of Cu does not change the morphology of TiO2-SiO2 catalyst dried at 150 °C.
The Cu K-edge XANES and EXAFS analysis were used to determine valence state and local structure of Cu cations in Cu-modified TiO2-SiO2 photocatalyst. The results elucidate the mechanism responsible for the improved or hindered photocatalytic activity. In the air-dried samples with low Cu content, which exhibit largest activity, Cu-O-Ti connections are formed, suggesting that the activity enhancement is due to Cu(II) cations attachment on the surface of the photocatalytically active TiO2 nanoparticles, so Cu(II) cations may act as free electron traps, reducing the intensity of recombination between electrons and holes at the TiO2 photocatalyst’s surface. At higher Cu loadings no additional Cu-O-Ti connections are formed, instead only Cu-O-Cu connections are established, indicating the formation of amorphous or nanocrystalline Cu(II) oxide, which hinders the photocatalytic activity of TiO2. Calcination of Cu-modified TiO2-SiO2 photocatalysts at 500 °C induces significant structural changes: Cu-O-Ti connections are lost, Cu partially incorporates into the SiO2 matrix and amorphous copper oxides, which again reduce the photocatalytic activity of the material, are formed. Keywords: titanium dioxide, Cu-modified TiO2-SiO2 photocatalyst, photocatalytic activity, Cu K-edge XANES, EXAFS. Published in RUNG: 17.12.2018; Views: 4711; Downloads: 146
Full text (3,05 MB) |
30. Sulfur based batteries studied by in-operando S K-edge RIXS and XAS spectroscopyMatjaž Kavčič, Ana Robba, Janez Bitenc, Alen Vižintin, Iztok Arčon, Matjaž Žitnik, Klemen Bučar, Robert Dominko, 2018, published scientific conference contribution abstract Abstract: Sulfur based batteries are considered as very attractive energy storage devices. Sulfur is one of the most abundant elements in the earth, it is electrochemically active material which can accept up to two electrons per atom. In combination with alkali metals, sulfur forms electrochemical couples with much higher theoretical energy density compared to Li-ion batteries commonly available today. At the moment, the electrochemical couple with Li is most extensively studied. While the main principle of operation is known the relevant operation mechanism(s) is not completely clear. Even more promising is the electrochemical couple with Mg providing almost twofold higher volumetric energy density due to its ability to provide two electrons during oxidation. However, Mg-S batteries are still in the very early stage of research and development and the complex mechanism of sulfur conversion has been less extensively studied.
In order to improve the understanding of sulfur electrochemical conversion and its interactions within electrode, we need to apply new experimental approaches capable to provide precise information about local environment of S in the cathode during battery operation. In our work, resonant inelastic X-ray scattering (RIXS) and XAS measurements at the sulfur K-edge performed in operando mode were used to study the lithium-polysulfide formation during the discharge process. Measurements were performed at ID26 beamline of the ESRF synchrotron using tender X-ray emission spectrometer [1]. Resonant excitation condition enhanced the sensitivity for the lithium−polysulfide detection. On the other hand, the sulfate signal from the electrolyte was heavily suppressed and the self-absorption effects minimized due to fixed excitation energy.
This experimental methodology was used to provide quantitative analysis of sulfur compounds in the cathode of a Li−S battery cell during the discharge process [2]. The high-voltage plateau in the discharge curve was characterized by a rapid conversion of solid sulfur into liquid phase Li polysulfides reaching its maximum at the end of this plateau. At this point the starting point for the precipitation of the Li2S from the liquid polysulfide phase was observed. The same approach has been used also for the Mg-S battery revealing similar mechanism as in case of Li-S battery [3]. The electrochemical conversion of sulfur with magnesium proceeds through two well-defined plateaus, which correspond to the equilibrium between sulfur and Mg polysulfides (high-voltage plateau) and polysulfides and MgS (low-voltage plateau). Keywords: Mg-Sulphur batteries, XANES, RIXS Published in RUNG: 13.09.2018; Views: 4513; Downloads: 0 This document has many files! More... |