Repository of University of Nova Gorica

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in
* old and bologna study programme

Options:
  Reset


1 - 2 / 2
First pagePrevious page1Next pageLast page
1.
Plasma-enhanced atomic layer deposition of amorphous Ga2O3 for solar-blind photodetection
Ze-Yu Fan, Min-Ji Yang, Bo-Yu Fan, Andraž Mavrič, Nadiia Pastukhova, Matjaž Valant, Bo-Lin Li, Kuang Feng, Dong-Liang Liu, Guang-Wei Deng, Qiang Zhou, Yan-Bo Li, 2022, original scientific article

Abstract: Wide-bandgap gallium oxide (Ga2O3) is one of the most promising semiconductor materials for solar-blind (200 nm–280 nm) photodetection. In its amorphous form, a-Ga2O3 maintains its intrinsic optoelectronic properties while can be prepared at a low growth temperature, thus is compatible with Si integrated circuits (ICs) technology. Herein, the a-Ga2O3 film is directly deposited on pre-fabricated Au interdigital electrodes by plasma enhanced atomic layer deposition (PE-ALD) at a growth temperature of 250 °C. The stoichiometric a-Ga2O3 thin film with a low defect density is achieved owing to the mild PE-ALD condition. As a result, the fabricated Au/a-Ga2O3/Au photodetector shows a fast time response, high responsivity, and excellent wavelength selectivity for solar-blind photodetection. Furthermore, an ultra-thin MgO layer is deposited by PE-ALD to passivate the Au/a-Ga2O3/Au interface, resulting in the responsivity of 788 A/W (under 254 nm at 10 V), a 250-nm-to-400-nm rejection ratio of 9.2×103, and the rise time and the decay time of 32 ms and 6 ms, respectively. These results demonstrate that the a-Ga2O3 film grown by PE-ALD is a promising candidate for high-performance solar-blind photodetection and potentially can be integrated with Si ICs for commercial production.
Keywords: Amorphous gallium oxide, Passivation layer, Plasma enhanced atomic layer deposition, Responsivity, Solar-blind photodetector
Published in RUNG: 25.10.2022; Views: 1128; Downloads: 0
This document has many files! More...

2.
Atomic layer deposition for the photoelectrochemical applications
Nadiia Pastukhova, Andraž Mavrič, Yanbo Li, 2021, review article

Abstract: Substantial progress has been made in the photoelectrochemical (PEC) field to understand the photoelectrode behavior, semiconductor‐electrolyte interface, and photocorrosion, enabling new photoelectrode architectures with higher photocurrent, reduced photovoltage losses, and longer lifetime. Nevertheless, for practical PEC applications additional efforts are still needed to optimize all components of the photoelectrodes, including the light absorbing semiconductors, the layers for charge extraction, charge transfer, corrosion protection, and catalysis. In this regard, atomic layer deposition (ALD) offers new opportunities due to the monolayer‐by‐monolayer deposition approach, allowing preparation of conformal films with precisely controlled thickness and composition. As the ALD instruments are becoming widely accessible, this review aims to make an overview of the applications for photoelectrodes fabrication. The deposition of semiconductors onto flat and nano‐textured substrates, the deposition of ultrathin interlayers to ease charge transport by energy band alignment and surface states passivation, the deposition of corrosion protection layers, and finally, the possibilities for high catalyst dispersion is presented.
Keywords: atomic layer deposition, charge recombination, charge transfer, photocorrosion, photoelectrochemical water splitting
Published in RUNG: 25.02.2021; Views: 2225; Downloads: 139
URL Link to full text
This document has many files! More...
Search done in 0.01 sec.
Back to top