1. Designing atomic interface in ▫$Sb_2S_3/CdS$▫ heterojunction for efficient solar water splittingMinji Yang, Zeyu Fan, Jinyan Du, Chao Feng, Ronghua Li, Beibei Zhang, Nadiia Pastukhova, Matjaž Valant, Matjaž Finšgar, Andraž Mavrič, Yanbo Li, 2024, izvirni znanstveni članek Opis: In the emerging Sb2S3‐based solar energy conversion devices, a CdS buffer layer prepared by chemical bath deposition is commonly used to improve the separation of photogenerated electron‐hole pairs. However, the cation diffusion at the Sb2S3/CdS interface induces detrimental defects but is often overlooked. Designing a stable interface in the Sb2S3/CdS heterojunction is essential to achieve high solar energy conversion efficiency. As a proof of concept, this study reports that the modification of the Sb2S3/CdS heterojunction with an ultrathin Al2O3 interlayer effectively suppresses the interfacial defects by preventing the diffusion of Cd2+ cations into the Sb2S3 layer. As a result, a water‐splitting photocathode based on Ag:Sb2S3/Al2O3/CdS heterojunction achieves a significantly improved half‐cell solar‐to‐hydrogen efficiency of 2.78% in a neutral electrolyte, as compared to 1.66% for the control Ag:Sb2S3/CdS device. This work demonstrates the importance of designing atomic interfaces and may provide a guideline for the fabrication of high‐performance stibnite‐type semiconductor‐based solar energy conversion devices.
Ključne besede: alumina, defect passivation, interface engineering, photoelectrochemical water splitting
Objavljeno v RUNG: 11.03.2024; Ogledov: 282; Prenosov: 2
 Celotno besedilo (4,59 MB)
Gradivo ima več datotek! Več... |
2. A novel multi-functional thiophene-based organic cation as passivation, crystalline orientation, and organic spacer agent for low-dimensional 3D/1D perovskite solar cellsAli Semerci, Ali Buyruk, Saim Emin, Rik Hooijer, Daniela Kovacheva, Peter Mayer, Manuel A. Reus, Dominic Blätte, Marcella Günther, Nicolai F. Hartmann, 2023, izvirni znanstveni članek Opis: Recently, the mixed-dimensional (3D/2D or 3D/1D) perovskite solar cellsusing small organic spacers have attracted interest due to their outstandinglong-term stability. Here, a new type of thiophene-based organic cation2-(thiophene-2yl-)pyridine-1-ium iodide (ThPyI), which is used to fabricatemixed-dimensional 3D/1D perovskite solar cells, is presented. TheThPyI-based 1D perovskitoid is applied as a passivator on top of a 3D methylammonium lead iodide (MAPI) to fabricate surface-passivated 3D/1Dperovskite films or added alone into the 3D perovskite precursor to generatebulk-passivated 3D MAPI. The 1D perovskitoid acts as a passivating agent atthe grain boundaries of surface-passivated 3D/1D, which improves the powerconversion efficiency (PCE) of the solar cells. Grazing incidence wide-angleX-ray scattering (GIWAXS) studies confirm that ThPyI triggers the preferentialorientation of the bulk MAPI slabs, which is essential to enhance chargetransport. Champion bulk-passivated 3D and surface-passivated 3D/1Ddevices yield 14.10% and 19.60% PCE, respectively. The bulk-passivated 3Doffers favorable stability, with 84% PCE retained after 2000 h withoutencapsulation. This study brings a new perspective to the design of organicspacers having a different binding motif and a passivation strategy to mitigatethe impact of defects in hybrid 3D/1D perovskite solar cells.A. Semerci, A. Buyruk, R. Hooijer, P. Mayer, D. Blätte, M. Günther, T. Bein,T. AmeriDepartment of Chemistry and Center for NanoScience (CeNS)Ludwig-Maximilians-Universität MünchenButenandtstrasse 5–13 (E), 81377 Munich, GermanyE-mail:tayebeh.ameri@ed.ac.ukS.EminMaterialsResearchLaboratoryUniversityofNovaGoricaVipavska13c,Ajdovšˇcina5270,SloveniaThe ORCID identification number(s) for the author(s) of this articlecan be found under https://doi.org/10.1002/adom.202300267© 2023 The Authors. Advanced Optical Materials published byWiley-VCH GmbH. This is an open access article under the terms of theCreative Commons Attribution-NonCommercial License, which permitsuse, distribution and reproduction in any medium, provided the originalwork is properly cited and is not used for commercial purposes.DOI: 10.1002/adom.2023002671. IntroductionDuring the last decade, 3D organic–inorganic halide perovskites (OIHPs) haveemerged as promising absorber materialsfor photovoltaic applications due to theirsuperior properties such as high absorp-tion coefficient, long diffusion length ofthe charge carriers, fast charge transport,and tunable bandgap. The 3D OIHPs havedemonstrated rapid increase in powerconversion efficiency (PCE) from 3.8% to25.2%.[1–9]On the other hand, their mod-erate intrinsic stability against moistureand heat still has been a concern with aview on possible commercialization.[10–14]Instability of the 3D methyl ammoniumlead iodide (MAPI) perovskite is assumedto be due to its crystalline structure. Ionicmigration is now well recognized to affectthe photovoltaic properties of perovskitesolar cells. Especially, the ionic migrationcauses the generation and displacement ofvacancies in perovskite materials. OIHPsare mixed ionic–electronic conductors withiodide ions as the majority of ionic carriers.D. KovachevaInstitute of General and Inorganic ChemistryBulgarian Academy of SciencesSofia 1113, BulgariaM. A. Reus, P. Müller-BuschbaumTUM School of Natural SciencesDepartment of PhysicsChair for Functional MaterialsTechnical University of MunichJames-Franck-Str. 1, 85748 Garching, GermanyN. F. HartmannAttocube systems AGNanoscale AnalyticsneaspecEglfinger Weg 2, 85540 Haar, GermanyS. Lotfi, J. P. HofmannSurface Science LaboratoryDepartment of Materials and Earth SciencesTechnical University of DarmstadtOtto-Berndt-Str. 3, 64287 Darmstadt, GermanyAdv. Optical Mater.2023,11, 23002672300267 (1 of 13)© 2023 The Authors. Advanced Optical Materials published by Wiley-VCH GmbH
Ključne besede: perovskites, solar cells, passivation
Objavljeno v RUNG: 04.12.2023; Ogledov: 478; Prenosov: 2
Celotno besedilo (3,81 MB)
Gradivo ima več datotek! Več... |
3. Plasma-enhanced atomic layer deposition of amorphous Ga2O3 for solar-blind photodetectionZe-Yu Fan, Min-Ji Yang, Bo-Yu Fan, Andraž Mavrič, Nadiia Pastukhova, Matjaž Valant, Bo-Lin Li, Kuang Feng, Dong-Liang Liu, Guang-Wei Deng, Qiang Zhou, Yan-Bo Li, 2022, izvirni znanstveni članek Opis: Wide-bandgap gallium oxide (Ga2O3) is one of the most promising semiconductor materials for solar-blind (200 nm–280 nm) photodetection. In its amorphous form, a-Ga2O3 maintains its intrinsic optoelectronic properties while can be prepared at a low growth temperature, thus is compatible with Si integrated circuits (ICs) technology. Herein, the a-Ga2O3 film is directly deposited on pre-fabricated Au interdigital electrodes by plasma enhanced atomic layer deposition (PE-ALD) at a growth temperature of 250 °C. The stoichiometric a-Ga2O3 thin film with a low defect density is achieved owing to the mild PE-ALD condition. As a result, the fabricated Au/a-Ga2O3/Au photodetector shows a fast time response, high responsivity, and excellent wavelength selectivity for solar-blind photodetection. Furthermore, an ultra-thin MgO layer is deposited by PE-ALD to passivate the Au/a-Ga2O3/Au interface, resulting in the responsivity of 788 A/W (under 254 nm at 10 V), a 250-nm-to-400-nm rejection ratio of 9.2×103, and the rise time and the decay time of 32 ms and 6 ms, respectively. These results demonstrate that the a-Ga2O3 film grown by PE-ALD is a promising candidate for high-performance solar-blind photodetection and potentially can be integrated with Si ICs for commercial production.
Ključne besede: Amorphous gallium oxide, Passivation layer, Plasma enhanced atomic layer deposition, Responsivity, Solar-blind photodetector
Objavljeno v RUNG: 25.10.2022; Ogledov: 1135; Prenosov: 0
Gradivo ima več datotek! Več... |
