Repository of University of Nova Gorica

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in
* old and bologna study programme

Options:
  Reset


1 - 4 / 4
First pagePrevious page1Next pageLast page
1.
Designing atomic interface in ▫$Sb_2S_3/CdS$▫ heterojunction for efficient solar water splitting
Minji Yang, Zeyu Fan, Jinyan Du, Chao Feng, Ronghua Li, Beibei Zhang, Nadiia Pastukhova, Matjaž Valant, Matjaž Finšgar, Andraž Mavrič, Yanbo Li, 2024, original scientific article

Abstract: In the emerging Sb2S3‐based solar energy conversion devices, a CdS buffer layer prepared by chemical bath deposition is commonly used to improve the separation of photogenerated electron‐hole pairs. However, the cation diffusion at the Sb2S3/CdS interface induces detrimental defects but is often overlooked. Designing a stable interface in the Sb2S3/CdS heterojunction is essential to achieve high solar energy conversion efficiency. As a proof of concept, this study reports that the modification of the Sb2S3/CdS heterojunction with an ultrathin Al2O3 interlayer effectively suppresses the interfacial defects by preventing the diffusion of Cd2+ cations into the Sb2S3 layer. As a result, a water‐splitting photocathode based on Ag:Sb2S3/Al2O3/CdS heterojunction achieves a significantly improved half‐cell solar‐to‐hydrogen efficiency of 2.78% in a neutral electrolyte, as compared to 1.66% for the control Ag:Sb2S3/CdS device. This work demonstrates the importance of designing atomic interfaces and may provide a guideline for the fabrication of high‐performance stibnite‐type semiconductor‐based solar energy conversion devices.
Keywords: alumina, defect passivation, interface engineering, photoelectrochemical water splitting
Published in RUNG: 11.03.2024; Views: 155; Downloads: 2
.pdf Full text (4,59 MB)
This document has many files! More...

2.
Atomic layer deposition for the photoelectrochemical applications
Nadiia Pastukhova, Andraž Mavrič, Yanbo Li, 2021, review article

Abstract: Substantial progress has been made in the photoelectrochemical (PEC) field to understand the photoelectrode behavior, semiconductor‐electrolyte interface, and photocorrosion, enabling new photoelectrode architectures with higher photocurrent, reduced photovoltage losses, and longer lifetime. Nevertheless, for practical PEC applications additional efforts are still needed to optimize all components of the photoelectrodes, including the light absorbing semiconductors, the layers for charge extraction, charge transfer, corrosion protection, and catalysis. In this regard, atomic layer deposition (ALD) offers new opportunities due to the monolayer‐by‐monolayer deposition approach, allowing preparation of conformal films with precisely controlled thickness and composition. As the ALD instruments are becoming widely accessible, this review aims to make an overview of the applications for photoelectrodes fabrication. The deposition of semiconductors onto flat and nano‐textured substrates, the deposition of ultrathin interlayers to ease charge transport by energy band alignment and surface states passivation, the deposition of corrosion protection layers, and finally, the possibilities for high catalyst dispersion is presented.
Keywords: atomic layer deposition, charge recombination, charge transfer, photocorrosion, photoelectrochemical water splitting
Published in RUNG: 25.02.2021; Views: 2167; Downloads: 138
URL Link to full text
This document has many files! More...

3.
4.
Photoelectrochemical Water Splitting Studies with nanostructured n and p-type semiconductor electrodes
Saim Emin, Matjaž Valant, 2017, published scientific conference contribution abstract (invited lecture)

Abstract: Photoelectrochemical water splitting has been demonstrated as a promising way to efficiently split water. Currently, solar-to-hydrogen conversion efficiency using state-of-the-art material combinations in PEC system is in the order of 7%. Fabrication of nanostructured materials with unique morphologies and compositions is an important factor to fully utilize the possibilities in this field. We will present different strategies for the preparation of nanostructured metal oxide thin films by using electrodeposition and wet-chemistry techniques. Focus will be given on the preparation of ZnO and CuO thin films where intermediate phases like Zn(OH)8Cl2.H2O and CuX (X=Br, Cl) were electrodeposited. Wet-chemistry synthesis techniques will be also explored for the preparation of nanostructured WO3 and a-Fe2O3 thin films. Especially, the hot-pyrolysis technique for the preparation of colloidal W and Fe/Fe-oxide nanoparticles will be shown. Spin-coating of W and Fe/Fe-oxide NPs onto optically conductive substrates and subsequent heat treatment of the obtained films was found to be a convenient way for the preparation of nanostructured WO3 and a-Fe2O3 thin films.
Keywords: photoelectrochemical water splitting, colloidal nanoparticles, semiconductor
Published in RUNG: 24.10.2017; Views: 4378; Downloads: 0
This document has many files! More...

Search done in 0.02 sec.
Back to top