Search the repository

A+ | A- | | SLO | ENG

Abstract: This study analyses 4-years of continuous 7-λ Aethalometer (AE-33) measurements in an urban-background environment of Athens, to resolve the spectral absorption coefficients (babs) for black carbon (BC) and brown carbon (BrC). An important BrC contribution (23.7 ± 11.6%) to the total babs at 370 nm is estimated for the period May 2015–April 2019, characterized by a remarkable seasonality with winter maximum (33.5 ± 13.6%) and summer minimum (18.5 ± 8.1%), while at longer wavelengths the BrC contribution is significantly reduced (6.8 ± 3.6% at 660 nm). The wavelength dependence of the total babs gives an annual-mean AAE370-880 of 1.31, with higher values in winter night-time. The BrC absorption and its contribution to babs presents a large increase reaching up to 39.1 ± 13.6% during winter nights (370 nm), suggesting residential wood burning (RWB) emissions as a dominant source for BrC. This is supported by strong correlations of the BrC absorption with OC, EC, the fragment ion m/z 60 derived from ACSM and PMF-analyzed organic fractions related to biomass burning (e.g. BBOA). In contrast, BrC absorption decreases significantly during daytime as well as in the warm period, reaching to a minimum during the early-afternoon hours in all seasons due to photo-chemical degradation. Estimated secondary BrC absorption is practically evident only during winter night-time, implying the fast oxidation of BrC species from RWB emissions. Changes in mixing-layer height do not significantly affect the BrC absorption in winter, while they play a major role in summer.
Keywords: spectral aerosol absorption, brown carbon, wood burning, organic aerosols, chemical composition, Athens
Published in RUNG: 10.05.2024; Views: 154; Downloads: 1
Link to file

Abstract: This study examines the concentrations and characteristics of carbonaceous aerosols (including saccharides) and inorganic species measured by PM2.5 filter sampling and a multi-wavelength Aethalometer during two campaigns in a mountainous, medium-sized, Greek city (Ioannina). The first campaign was conducted in summer and used as a baseline of low concentrations, while the second took place in winter under intensive residential wood burning (RWB) emissions. Very high winter-mean OC concentrations (26.0 μg m−3) were observed, associated with an OC/EC ratio of 9.9, and mean BCwb and PM2.5 levels of 4.5 μg m−3 and 57.5 μg m−3, respectively. Simultaneously, record-high levoglucosan (Lev) concentrations (mean: 6.0 μg m−3; max: 15.9 μg m−3) were measured, revealing a severely biomass burning (BB)-laden environment. The water-soluble OC component (WSOC) accounted for 56 ± 9% of OC in winter, exhibiting high correlations (R2 = 0.93–0.97) with BB tracers (nss-K+, BCwb, Lev), nitrate and light absorption, potentially indicating the formation of water-soluble brown carbon (BrC) from fast oxidation processes. The examination of diagnostic ratios involving BB tracers indicated the prevalence of hardwood burning, while the mean Lev/OC ratio (22%) was remarkably higher than literature values. Applying a mono-tracer method based on levoglucosan, we estimated very high BB contributions to OC (∼92%), EC (∼64%) and WSOC (∼87%) during winter. On the contrary, low levels were registered during summer for all carbonaceous components, with winter/summer ratios of 4–5 for PM2.5 and BC, 10 for OC, 30 for BCwb and ∼1100 for levoglucosan. The absence of local BB sources in summer, combined with the photochemical processing and aging of regional organic aerosols, resulted in higher WSOC/OC fractions (64 ± 13%). The results indicate highly soluble fine carbonaceous aerosol fraction year-round, which when considered alongside the extreme concentration levels in winter can have important implications for short- and long-term health effects.
Keywords: carbonaceous aerosols, biomass burning, levoglucosan, WSOC, heterogeneous chemistry, Greece
Published in RUNG: 10.05.2024; Views: 136; Downloads: 2
Link to file
This document has many files! More...

Abstract: Vertical profiling of aerosol particles was performed during the PANhellenic infrastructure for Atmospheric Composition and climatE chAnge (PANACEA) winter campaign (10 January 2020–7 February 2020) over the city of Ioannina, Greece (39.65° N, 20.85° E, 500 m a.s.l.). The middle-sized city of Ioannina suffers from wintertime air pollution episodes due to biomass burning (BB) domestic heating activities. The lidar technique was applied during the PANACEA winter campaign on Ioannina city, to fill the gap of knowledge of the spatio-temporal evolution of the vertical mixing of the particles occurring during these winter-time air pollution episodes. During this campaign the mobile single-wavelength (532 nm) depolarization Aerosol lIdAr System (AIAS) was used to measure the spatio-temporal evolution of the aerosols’ vertical profiles within the Planetary Boundary Layer (PBL) and the lower free troposphere (LFT; up to 4 km height a.s.l.). AIAS performed almost continuous lidar measurements from morning to late evening hours (typically from 07:00 to 19:00 UTC), under cloud-free conditions, to provide the vertical profiles of the aerosol backscatter coefficient (baer) and the particle linear depolarization ratio (PLDR), both at 532 nm. In this study we emphasized on the vertical profiling of very fresh (~hours) biomass burning (BB) particles originating from local domestic heating activities in the area. In total, 33 out of 34 aerosol layers in the lower free troposphere were characterized as fresh biomass burning ones of local origin, showing a mean particle linear depolarization value of 0.04 ± 0.02 with a range of 0.01 to 0.09 (532 nm) in a height region 1.21–2.23 km a.s.l. To corroborate our findings, we used in situ data, particulate matter (PM) concentrations (PM2.5) from a particulate sensor located close to our station, and the total black carbon (BC) concentrations along with the respective contribution of the fossil fuel (BCff) and biomass/wood burning (BCwb) from the Aethalometer. The PM2.5 mass concentrations ranged from 5.6 to 175.7 μg/m3, while the wood burning emissions from residential heating were increasing during the evening hours, with decreasing temperatures. The BCwb concentrations ranged from 0.5 to 17.5 μg/m3, with an extremely high mean contribution of BCwb equal to 85.4%, which in some cases during night-time reached up to 100% during the studied period.
Keywords: lidar, depolarization ratio, fresh biomass burning aerosols, domestic heating, black carbon, PM2.5
Published in RUNG: 10.05.2024; Views: 126; Downloads: 3
Full text (6,36 MB)
This document has many files! More...

Abstract: Abstract. Particulate matter (PM) has become a major concern in terms of human health and climate impact. In particular, the source apportionment (SA) of organic aerosols (OA) present in submicron particles (PM1) has gained relevance as an atmospheric research field due to the diversity and complexity of its primary sources and secondary formation processes. Moreover, relatively simple but robust instruments such as the Aerosol Chemical Speciation Monitor (ACSM) are now widely available for the near-real-time online determination of the composition of the non-refractory PM1. One of the most used tools for SA purposes is the source-receptor positive matrix factorisation (PMF) model. Even though the recently developed rolling PMF technique has already been used for OA SA on ACSM datasets, no study has assessed its added value compared to the more common seasonal PMF method using a practical approach yet. In this paper, both techniques were applied to a synthetic dataset and to nine European ACSM datasets in order to spot the main output discrepancies between methods. The main advantage of the synthetic dataset approach was that the methods' outputs could be compared to the expected “true” values, i.e. the original synthetic dataset values. This approach revealed similar apportionment results amongst methods, although the rolling PMF profile's adaptability feature proved to be advantageous, as it generated output profiles that moved nearer to the truth points. Nevertheless, these results highlighted the impact of the profile anchor on the solution, as the use of a different anchor with respect to the truth led to significantly different results in both methods. In the multi-site study, while differences were generally not significant when considering year-long periods, their importance grew towards shorter time spans, as in intra-month or intra-day cycles. As far as correlation with external measurements is concerned, rolling PMF performed better than seasonal PMF globally for the ambient datasets investigated here, especially in periods between seasons. The results of this multi-site comparison coincide with the synthetic dataset in terms of rolling–seasonal similarity and rolling PMF reporting moderate improvements. Altogether, the results of this study provide solid evidence of the robustness of both methods and of the overall efficiency of the recently proposed rolling PMF approach.
Keywords: particulate matter, synthetic dataset comparison, source apportionment, organic aerosols
Published in RUNG: 10.05.2024; Views: 132; Downloads: 4
Full text (2,03 MB)
This document has many files! More...

Abstract: The present invention belongs to the field of devices and methods for measurement of particle concentration, more precisely to the field of devices and methods for quantification of particles based on their physical characteristics, especially with the use of optical means. The invention relates to a method for determination of ambient mineral dust concentration based on optical absorption of particles concentrated by a virtual impactor as well as a device performing the said method. The method comprises the following steps:- Sampling air samples with particle size smaller than 1 µm (PM1) and sampling air samples with particle size up to 10 µm;- Concentrating the samples with particle sizes up to 10 µm with a virtual impactor;- Measuring optical absorption of collected samples at least one wavelength from UV to IR spectre, preferably from 370 to 950 nm, most preferably at 370 nm;- Subtracting the absorption of the samples with particle size smaller than 1 µm from the absorption of the sample concentrated by the virtual impactor.
Keywords: dust, black carbon, aerosols
Published in RUNG: 24.04.2024; Views: 735; Downloads: 2
Link to file
This document has many files! More...