Repository of University of Nova Gorica

Search the repository
A+ | A- | Help | SLO | ENG

Query: search in
search in
search in
search in
* old and bologna study programme

Options:
  Reset


1 - 10 / 60
First pagePrevious page123456Next pageLast page
1.
Nickel-decorated ZnO nanoparticles for effective solar reduction of hexavalent chromium and removal of selected pharmaceuticals
Miha Ravbar, Ksenija Maver, Tilen Knaflič, Iztok Arčon, Nataša Novak Tušar, Urška Lavrenčič Štangar, Andraž Šuligoj, 2025, original scientific article

Abstract: The efficient visible light driven photocatalytic reduction of hexavalent chromium, Cr(VI) was demonstrated using ZnO nanoparticles (NPs) decorated with oxo-clusters of transition metals. The ZnO NPs were synthesized by a facile one-pot solvothermal synthesis followed by a fast microwave-assisted (MW) grafting of transition metals on the surface of NPs. Nickel was found to be the most active transition metal for photocatalytic activity as demonstrated by reduction of Cr(VI) to Cr(III). The optimally grafted samples contained 0.5 wt% Ni and increased photocatalytic activity by almost one-fold. The oxo-clusters did not enter the lattice of ZnO but rather resided on the surface and their efficient bonding to the ZnO surface was proved by Raman, TEM and X-Ray absorption techniques. Influence of MW power was studied and shown that excessive power load leads to formation of elongated structures of ZnO which decreases the photocatalytic activity. It was demonstrated by measuring fluorescent radical products that electrons, efficiently transferred via oxygen, were the main active species in combination with the unchanged oxidation power of holes and • OH in the grafted samples. The applicability of the materials was tested in immobilized plug flow photoreactor system degrading five pharmaceuticals simultaneously where their long-term use was shown.
Keywords: Zinc oxide, Pharmaceuticals, Grafting, Cr(VI), Zn XANES, Zn EXAFS
Published in RUNG: 24.10.2024; Views: 235; Downloads: 2
.pdf Full text (4,49 MB)
This document has many files! More...

2.
Structural and chemical analysis of hard carbon negative electrode for Na-ion battery with X-ray Raman scattering and solid-state NMR spectroscopy
Ava Rajh, Matej Gabrijelčič, Blaž Tratnik, Klemen Bučar, Iztok Arčon, Marko Petric, Robert Dominko, Alen Vižintin, Matjaž Kavčič, original scientific article

Abstract: This study explores the structural changes of hard carbon (HC) negative electrodes in sodium-ion batteries induced by insertion of Na ions during sodiation. X-ray Raman spectroscopy (XRS) was used to record both C and Na K-edge absorption spectra from bulk HC anodes carbonized at different temperatures and at several points during sodiation and desodiation. Comparing the [pi]*/[sigma]* regions in the C K-edge spectra sp2/sp3 hybridization ratio of material was determined. Higher carbonization temperatures led to increased order in graphitic structure and shorter bond lengths. Sodiation caused a decrease in graphitic layer order due to inserted Na ions. Complementary operando solid state 23Na nuclear magnetic resonance (ssNMR) studies confirmed the structural changes, while showing pore filling mechanism, which is not observed in ex situ measurements, primarily at higher carbonization temperatures. XRS analysis of Na K-edge spectra revealed systematic variations in the solid electrolyte interface (SEI) composition during cycling. Changes in XRS spectra were attributed to both SEI composition alterations, accompanied by the insertion/adsorption of Na ions at defect sites within the carbon structure.
Keywords: hard carbon, RIXS, carbon XANES, EXAFS, NMR, Na battery
Published in RUNG: 10.09.2024; Views: 683; Downloads: 1
.pdf Full text (7,76 MB)
This document has many files! More...

3.
XAS analysis of bifunctional Ni/ZSM-5 catalysts
Iztok Arčon, Hue-Tong Vu, Goran Dražić, Janez Volavšek, Gregor Mali, Nataša Zabukovec Logar, Nataša Novak Tušar, 2024, published scientific conference contribution abstract

Abstract: In a bifunctional Ni/ZSM-5 zeolite type catalyst, catalytic properties are usually tuned via varying Al and Ni contents [1]. Here we present a systematic structural study of the Ni/ZSM-5 materials by Ni K-edge XANES and EXAFS analyses, to monitor the changes of local structure and chemical state of Ni species in the catalysts as a function of Al and Ni content. A series of Ni/ZSM-5 type zeolites with different Al to Si and Ni to Si molar ratios were synthesized by a “green”, template free technique [2]. With a combination of XAS, XRD and TEM we resolved the changes in the local environment of Ni species induced by the different Al contents in the Ni/ZSM-5 catalysts. Ni species in Ni/ZSM-5 exist as NiO nanocrystals and as charge compensating Ni2+ cations. The Ni K-edge XANES and EXAFS results enabled the quantification of Ni-containing species. At a low Al to Si ratio (nAl/nSi < 0.04), the NiO nanoparticles predominate in the samples and account for over 65% of Ni phases. However, NiO is outnumbered by Ni2+ cations attached to the zeolite framework in ZSM-5 with a high Al to Si ratio (nAl/nSi = 0.05) due to a higher number of framework negative charges imparted by Al. The obtained results show that the number of highly reducible and active NiO nanocrystals is strongly correlated with the framework Al sites present in Ni/ZSM-5 zeolites.
Keywords: Ni EXAFS, XANES Ni/ZSM-5 catalyst
Published in RUNG: 05.07.2024; Views: 794; Downloads: 3
URL Link to file
This document has many files! More...

4.
Synthesis of helional by hydrodechlorination reaction in the presence of mono- and bimetallic catalysts supported on alumina
Oreste Piccolo, Iztok Arčon, Das Gangadhar, Giuliana Aquilanti, Andrea Prai, Stefano Paganelli, Manuela Facchin, Valentina Beghetto, 2024, original scientific article

Abstract: Hydrodechlorination reaction of 3-(benzo-1,3-dioxol-5-yl)-3-chloro-2-methylacrylaldehyde in the presence of different low metal content heterogeneous mono- or bimetallic catalysts was tested for the synthesis of the fragrance Helional® (3-[3,4-methylendioxyphenyl]-2-methyl-propionaldehyde). In particular, mono Pd/Al2O3, Rh/Al2O3 or bimetallic Pd-Cu/Al2O3, Rh-Cu/Al2O3 catalysts were tested in different reaction conditions from which it emerged that mono-Rh/Al2O3 was the best performing catalyst, allowing achievement of 100% substrate conversion and 99% selectivity towards Helional® in 24 h at 80 °C, p(H2) 1.0 MPa in the presence of a base. To establish correlations between atomic structure and catalytic activity, catalysts were characterized by Cu, Rh and Pd K-edge XANES, EXAFS analysis. These characterizations allowed verification that the formation of Pd-Cu alloys and the presence of Cu oxide/hydroxide species on the surface of the Al2O3 support are responsible for the very low catalytic efficiency of bimetallic species tested.
Keywords: selective hydrodechlorination, heterogeneous catalysis, XANES analysis, EXAFS analysis
Published in RUNG: 25.04.2024; Views: 1577; Downloads: 9
.pdf Full text (446,63 KB)
This document has many files! More...

5.
Insight into the interdependence of Ni and Al in bifunctional Ni/ZSM-5 catalysts by Ni K-edge XAS analysis
Iztok Arčon, Hue-Tong Vu, Goran Dražić, Janez Volavšek, Gregor Mali, Nataša Zabukovec Logar, Nataša Novak Tušar, 2023, published scientific conference contribution abstract

Abstract: Catalyst design is crucial for improving catalytic activity and product selectivity. In a bifunctional Ni/ZSM-5 zeolite type catalyst, catalytic properties are usually tuned via varying Al and Ni contents [1]. While changes in acid properties associated with Al sites are usually closely investigated, Ni phases, however, receive inadequate attention. Herein, we present a systematic structural study of Ni in the Ni/ZSM-5 materials by Ni K-edge XANES (X-ray absorption near edge structure) and EXAFS (extended X-ray absorption fine structure) analyses, to monitor the local structure and chemical state of Ni species in the catalysts. In combination with XRD and TEM we resolved the changes in the local environment of Ni species induced by the different Al contents of the parent ZSM-5 prepared by a “green”, template free technique [2]. Ni species in Ni/ZSM-5 exist as NiO crystals (3–50 nm) and as charge compensating Ni2+ cations. The Ni Kedge XANES and EXAFS results enabled the quantification of Ni-containing species. At a low Al to Si ratio (nAl/nSi < 0.04), the NiO nanoparticles predominate in the samples and account for over 65% of Ni phases. However, NiO is outnumbered by Ni2+ cations attached to the zeolite framework in ZSM-5 with a high Al to Si ratio (nAl/nSi = 0.05) due to a higher number of framework negative charges imparted by Al. The obtained results show that the number of highly reducible and active NiO crystals is strongly correlated with the framework Al sites present in ZSM-5 zeolites, which depend greatly on the synthesis conditions. Therefore, this kind of study is beneficial for any further investigation of the catalytic activities of Ni/ZSM-5 and other metal-modified bifunctional catalysts.
Keywords: Ni/ZSM-5 catalysts, Ni EXAFS, XANES
Published in RUNG: 19.09.2023; Views: 1679; Downloads: 5
URL Link to file
This document has many files! More...

6.
Saturation magnetisation as an indicator of the disintegration of barium hexaferrite nanoplatelets during the surface functionalisation
Darja Lisjak, Iztok Arčon, Matic Poberžnik, Gabriela Herrero‑Saboya, Ali Tufani, Andraž Mavrič, Matjaž Valant, Patricija Hribar Boštjančič, Alenka Mertelj, Darko Makovec, Layla Martin‑Samos, 2023, original scientific article

Abstract: Barium hexaferrite nanoplatelets (BHF NPLs) are permanent nanomagnets with the magnetic easy axis aligned perpendicular to their basal plane. By combining this specific property with optimised surface chemistry, novel functional materials were developed, e.g., ferromagnetic ferrofluids and porous nanomagnets. We compared the interaction of chemically different phosphonic acids, hydrophobic and hydrophilic with 1–4 phosphonic groups, with BHF NPLs. A decrease in the saturation magnetisation after functionalising the BHF NPLs was correlated with the mass fraction of the nonmagnetic coating, whereas the saturation magnetisation of the NPLs coated with a tetraphosphonic acid at 80 °C was significantly lower than expected. We showed that such a substantial decrease in the saturation magnetisation originates from the disintegration of BHF NPLs, which was observed with atomic-resolution scanning transmission electron microscopy and confirmed by a computational study based on state-of-the-art first-principles calculations. Fe K-edge XANES (X-ray absorption near-edge structure) and EXAFS (Extended X-ray absorption fine structure) combined with Fourier-transformed infrared (FTIR) spectroscopy confirmed the formation of an Fe–phosphonate complex on the partly decomposed NPLs. Comparing our results with other functionalised magnetic nanoparticles confirmed that saturation magnetisation can be exploited to identify the disintegration of magnetic nanoparticles when insoluble disintegration products are formed.
Keywords: barium hexaferrite, Fe XANES, EXAFS, magnetic nanoparticles
Published in RUNG: 06.07.2023; Views: 2338; Downloads: 7
.pdf Full text (3,60 MB)
This document has many files! More...

7.
8.
Winning combination of Cu and Fe oxide clusters with an alumina support for low-temperature catalytic oxidation of volatile organic compounds
Tadej Žumbar, Iztok Arčon, Petar Djinović, Giuliana Aquilanti, Gregor Žerjav, Albin Pintar, Alenka Ristić, Goran Dražić, Janez Volavšek, Gregor Mali, Margarita Popova, Nataša Zabukovec Logar, Nataša Novak Tušar, 2023, original scientific article

Abstract: A γ-alumina support functionalized with transition metals is one of the most widely used industrial catalysts for the total oxidation of volatile organic compounds (VOCs) as air pollutants at higher temperatures (280−450 °C). By rational design of a bimetal CuFe-γ-alumina catalyst, synthesized from a dawsonite alumina precursor, the activity in total oxidation of toluene as a model VOC at a lower temperature (200−380 °C) is achieved. A fundamental understanding of the catalyst and the reaction mechanism is elucidated by advanced microscopic and spectroscopic characterizations as well as by temperature-programmed surface techniques. The nature of the metal−support bonding and the optimal abundance between Cu−O−Al and Fe−O−Al species in the catalysts leads to synergistic catalytic activity promoted by small amounts of iron (Fe/Al = 0.005). The change in the metal oxide−cluster alumina interface is related to the nature of the surfaces to which the Cu atoms attach. In the most active catalyst, the CuO6 octahedra are attached to 4 Al atoms, while in the less active catalyst, they are attached to only 3 Al atoms. The oxidation of toluene occurs via the Langmuir−Hinshelwood mechanism. The presented material introduces a prospective family of low-cost and scalable oxidation catalysts with superior efficiency at lower temperatures.
Keywords: Iron oxide clusters, copper oxide clusters, alumina support, synergistic effect, low-temperature total catalytic oxidation, toluene, Cu, Fe XANES, EXAFS
Published in RUNG: 06.07.2023; Views: 2557; Downloads: 27
.pdf Full text (11,05 MB)
This document has many files! More...

9.
Selenium affects mercury ligand environment in terrestrial food chain – a XAS study
Katarina Vogel Mikuš, Alojz Kodre, Iztok Arčon, Anja Kavčič, 2022, published scientific conference contribution abstract

Abstract: Selenium (Se) supplied in inorganic form (as selenate or selenite) was shown to decrease mercury (Hg) toxicity by forming HgSe in soils as well as in animal and human tissues, while for plants there is no evidence of Hg-Se complexation. Although Se in not an essential element for plants it was shown to counteract various abiotic stresses when applied at trace amounts. The aim of this work was therefore to study physiological responses and Hg speciation in plant/ fungi-animal food chain. Lettuce (Lactuca sativa) and porcini mushrooms (Boletus edulis) were taken as model plant/ fungal species and Spanish slug (Arion vulgaris) as a model animal species. The plants, fed to the slugs, were grown in HgCl2 contaminated soil or soil from the vicinity of Hg mine in Idrija with traces of HgS and methyl Hg). Physiological parameters of plants and slugs were monitored during the experiment. At the end the biological material was frozen in LN2 and freeze dried. Hg L3-edge (12284 eV) XANES and EXAFS spectra of the biological samples and standards were measured at liquid helium temperature in fluorescence detection mode at the BM30B beamline of the ESRF synchrotron in Grenoble, using the 30-segment germanium solid state detector [1]. The results showed that addition of Se alleviated Hg toxic effects in the food chain started at HgCl2-contaminated soil, while for the soil from Idrija, containing low amounts of highly toxic methyl-Hg, the beneficial effect was less prominent [2]. No Hg-Se complexes were detected in plants, while in mushrooms and slugs the complexation was confirmed. Addition of Se to the plants, however, changed Hg ligand environment in plant tissues from sulphur to nitrogen ligands. Hg and Se both target the -SH functional groups in the plant tissues, so toxic effects of Hg are rather enhanced than alleviated by addition of Se. Nevertheless, the addition of Se to the plants is beneficial for higher trophic levels and lowers Hg toxicity for the primary consumers, the slugs.
Keywords: mercury, toxicity, ligand environment, XANES, EXAFS, food chain, plant, slug, fungi
Published in RUNG: 05.12.2022; Views: 2171; Downloads: 0
This document has many files! More...

10.
Monitoring chemical processes in (photo)catalysts and energy storage materials by operando X-ray absorption spectroscopy
Iztok Arčon, 2022, published scientific conference contribution abstract (invited lecture)

Abstract: X-ray absorption spectroscopy (XAS) is a powerful tool for characterisation of local structure and chemical state of selected elements in different new functional materials and biological or environmental samples. The XAS spectroscopy is based on extremely bright synchrotron radiation X-rays sources, which allow precise characterisation of bulk, nanostructured or highly diluted samples. The rapid development of extremely bright synchrotron sources of X-ray and ultraviolet light in recent years has opened new possibilities for research of matter at the atomic or molecular level, indispensable in the development of new functional nanostructured materials with desired properties. The talk will present the possibilities offered by X-ray absorption spectroscopy with synchrotron light for ex-situ or operando characterization of various functional porous and other nanomaterials, before, after and during their operation [1,2,3,4]. New generation of synchrotron light sources also opened the possibility of combining X-ray absorption with high-resolution emission [5] and inelastic scattering spectroscopy [6], and microscopy with sub-micron resolution [7]. Examples of operando XANES and EXAFS analysis to track changes in the valence states and local structures of selected elements in different energy storage materials and in various (photo)catalysts, during chemical reactions under controlled reaction conditions, will be presented, which provided insight into the dynamic functional properties and reaction mechanisms of these materials. Access to SR facilities of Petra III (beamlines P65, P64 and P01), ESRF (beamlines BM23, ID21, ID26) and Elettra (beamlines XAFS, XRF), for the presented research is kindly acknowledged.
Keywords: X-ray absorption spectroscopy, operando XANES, EXAFS, catalysts, batteries
Published in RUNG: 07.10.2022; Views: 1787; Downloads: 0
This document has many files! More...

Search done in 0.04 sec.
Back to top